Descripción del producto
***0L CIP
Product classification: Transformation of
fermentation engineering
Applications area: Beer Bars, Hotels,
Restaurants etc.
Product features:
1. With insulation, superior hole, emptying device, liquid level
display, temperature display, with a cleaner;
2. Single-layer tank, superior hole, emptying device, level
display, temperature display, with a cleaner, inner coil
heating;
1ã€CIP Cleaning
System
With the development of the video industry, CIP system has develop
and improve. Initially cleaning on the tank, pipe and other
equipment by the manual, time-consuming and ineffective. CIP system
uses fluid circulation to clean tanks, piping and equipment,
without disassembly to achieve the desired cleaning effect. CIP
cleaning system to ensure a certain cleaning effect, improve
product safety; save operating time, improve efficiency; save
labor, protect the operation of security; save water, steam and
other energy, reduce the amount of detergent; production equipment
can be large-scale, High level; extend the service life of the
production equipment.
â‘ CIP cleaning
mechanism of action
Chemical energy is mainly generated by the added chemical
reagents,is the most important factor for wash. General
manufacturers can choose detergent based on the nature and extent
of pollution, constitute the material, water quality, selected
cleaning methods,cost and safety aspects.
Physical energy can be powered primarily by the washing pump, the
cleaning solution is sprayed onto the inner surface of the tank and
the cleaning fluid flows down the tank wall. In general, the effect
of such a mechanical effect is very small, cleaning effect mainly
by the chemical effect.
â‘¡ Characteristics of
Dirt in Fermentation Engineering
In the fermentation process, the dirt is generally combined with
inorganic and organic matter, the structure is as follows: to
inorganic as the skeleton, organic matter filled in them.
â‘¢ Pollutant cleaning
sequence
The structural characteristics of pollutants determine the method
and sequence of dirt cleaning
： Dirt outsourced
as organic matter, must be corrosive with inorganic solvents, and
then remove the organic matter in the dirt
， dirt in the
inorganic skeleton is revealed, and then use the organic solvent to
remove the inorganic matter, the whole dirt can be washed off. In
the fermentation process, the general use of lye to remove organic
matter. Use acid to remove inorganic, and advanced alkaline cycle,
and then the acidic cycle, the order can not be reversed,
otherwise, the cleaning effect will be relatively poor.
2ã€CIP cleaning
effect evaluation criteria as the food industry ideal CIP, cleaning
effect must meet the standard:
â‘ Odor: fresh, no
different smell, for special processing of goods special settlement
allows a slight smell but does not affect the final product safety
and their own quality.
â‘¡ vision: clean the
surface bright, no water, no film, no dirt or other.
â‘¢ effect: After CIP
treatment, the production capacity of the equipment significantly
changed, health-level indicators to meet the relevant
requirements.
3ã€Applicable
scope
Applicable to the entire fermentation engineering system cleaning,
sterilization
4ã€Structure
â‘ All tanks are
made of high quality **4 or **6 stainless steel materials, argon
protection welding, polishing, outsourcing according to the
requirements of processing, high-quality key valves.
â‘¡ Use automatic control
technology and semi-automatic combination, according to the needs
of customers to configure a reasonable
â‘¢ the cleaning tank has
its own cleaning function.
5ã€Cleaning
process
6ã€CIP station
system
The CIP station consists of physical cleaning tank, chemical
cleaning tank, pipe, pump, control system and accessory. Physical
cleaning tank, chemical cleaning tank, pump, connected through the
pipeline and to be cleaned equipment.Through the CIP control system
to control on the cleaning fluid pressure, flow, temperature.
System configuration structure table
|
Name |
Specification |
Quantity |
Effect |
|
Concentrated alkali tank |
With insulation, superior hole, emptying device, liquid level
display, temperature display, with a cleaner |
**4 stainless steel |
Store the concentrated base |
|
Dilute the alkali tank |
With insulation, superior hole, emptying device, liquid level
display, temperature display, with a cleaner, inner coil
heating, |
**4 stainless steel |
Alkaline cleaning |
|
Concentrated cans |
With insulation, superior hole, emptying device, liquid level
display, temperature display, with a cleaner |
Select **6 or **4 according to the nature of the acid used |
Store concentrated acid |
|
Dilute the alkali tank |
With insulation, superior hole, emptying device, liquid level
display, temperature display, with a cleaner, the coil heating,
circulation back to the tube, according to process requirements to
decide whether to add heating device |
Select **6 or **4 according to the nature of the acid used
**4 stainless steel |
Acid cleaning |
|
Hot water tank |
With insulation, superior hole, emptying device, liquid level
display, temperature display, with a cleaner, inner coil
heating, |
**4 stainless steel |
Hot water rinse |
|
Disinfectant tank |
Single-layer tank, superior hole, emptying device, level display,
temperature display, with a cleaner, inner coil heating, |
**4 stainless steel |
Disinfection cleaning |
|
Sterile water tank |
Single layer tank, superior hole, overflow device, liquid level
display, with a cleaner |
**4 stainless steel or **6L |
Sterile water rinse |
|
CIP pump |
Low flow, high lift |
**4 stainless steel |
Cleaning, recycling |
|
Heater |
Tubular (in vitro) coil type (in vivo) sheet heat exchanger |
**4 stainless steel |
Heat the cleaning solution |
|
Level display |
Glass tube, differential pressure transmission |
attaching |
Display level |
|
valve |
Pneumatic valve or manual valve |
**4 stainless steel |
Cleaning control |
|
Pipe filter |
Oblique insertion |
**4 stainless steel |
Filter intercept |
|
Control System |
1PLC control |
1attaching |
1Cleaning control |
The technical parameter of CIP cleaning system
|
Name |
Specification |
Tank height |
Tank diameter |
Quantity |
Material |
Applicability
（**0hl/y） |
Remarks |
|
1Acid tank/ lye tank/sterilize tank /hot water recycle tank |
****0L |
***0 |
***0 |
1 |
**4 |
****0 |
The hot lye tank and the hot water recycle tank are adopted the
polyurethane insulation
|
|
***0L |
***0 |
***0 |
1 |
**4 |
****0 |
|
***0L |
***0 |
***0 |
1 |
**4 |
****0 |
|
****0L |
***0 |
***0 |
1 |
**4 |
More than ***0 |
|
Washing pump |
*0t**0t/h |
...... |
...... |
**2 |
**4 |
...... |
|
Pipes and valves |
...... |
...... |
...... |
Attaching |
**4 |
...... |
|
Control system |
...... |
...... |
...... |
Attaching |
**4 |
...... |
The main equipments of CIP cleaning system are: hot alkali tank,
cold alkali tank, acid tank, disinfection tank, recycling water
tank, CIP transfer pump etc.
1. All tanks are adopted high-quality **4 stainless steel material,
argon protection welding, inner and outer polishing processing,
high quality valves and pipes, optimization technology link.
2. Adopt the automatic control technology, temperature, realized
the automatic control of temperature, pressure, flow, liquid level
etc, satisfy the need of automatic cleaning in every production
connection.
3. Chose the advanced technology, the general cleaning process: hot
water washing
→ hot alkali
water
→ clean
water
→ acid water
cleaning
→ clean
water
→ ppm level hydrogen
peroxide
→ asepsis water;
after finish of each link, recovery the washing and recycling using
to reduce the environmental pollution.
| País: |
China |
| N º de Modelo: |
ZH-2000L CIP
|
| Precio FOB: |
( Negotiable ) (Negociable)
Obtener el precio más reciente
|
| Lugar de origen: |
china |
| Precio de pedido mínimo: |
- |
| Cantidad de pedido mínimo: |
1 Set |
| Detalle de embalaje: |
container |
| El tiempo de entrega: |
40 days |
| Capacidad de suministro: |
1 Set per Month |
| Tipo de pago: |
T/T |
| Grupo de productos : |
CLEANING MACHNERY
|
