Los Angeles,California,USA USA
Persona de contacto Reus
Dirección Los Angeles, California, USA
Contactar ahora Califique a esta empresa Informe sobre Fraude
In addition we would like for this material to contribute to the
"story" of the product in terms of innovation and responsibility.
Similar to the way the the MYTO chair for Plank showcased Ultradur
for BASF.
Plastic Moulding company is a leader among mould makers. Our main
focus is creating the highest quality products. Plastic Moulding
company is a china injection mould company. Our company
concentrates on mould design and mould manufacture. The main
products are Plastic Injection Mould, Injection Moulding and Custom
Plastic Moulding.
I suggest Compression moulding with sheet moulding compound (SMC).
We supply seats to the Jetski industry where they neeed high
strength, impact resistence, light weight, modulus and thin cross
sections. Are SMC fiberglass have these properties :
Flex Strength > *5,**0 psi
Flex Modulus > 3.0 x *0 to the 6 psi
Tensile Strength > *0,**0 psi
Tensile Modulus > 3.8 x *0 to the 6 psi
Impact, notched > *3
Compression strength > *2,**0 PSI
moulding with harden steel match dies, good repeatability and fast
cycle time. The SMC is also cost effective.
I would say you have had some sound advice from all contributers. A
moulded part is always the sum of materials, design, and to a
limited extent processing parameters.
One can compensate for bad design by good materials and vice
versa.
For an immediate solution to the problem I would try high flex homo
and if not sufficient add fillers such as talc or glass fiber.
While this would increase the price of the chair it will buy me
time to perform a study of the mould and a DOA in order to solve
the problem.
Visit www.injectionmoulding.org to learn more about us.
Tipo de Comercio | Manufacturing |
Sitio Web | http://www.injectionmoulding.org |
Año de Constitución | 2005 |
Number of Employees | 100+ |
Principales Mercados | Americas,Middle East,Worldwide |
Company Products / Services | plastic injection moulding, plastic parts, custom plastic moulding, injection moulding |
Localización de la fábrica | Los Angeles |
Ubicaciones de fábrica | 10000 sqm to 250000 sqm |
No. de líneas de producción | 8 |
Volumen de compra anual total | 50 - 100 Million USD |
Nº de personal de I + D | 6 - 10 people |
Control de calidad | Third Parties |
Certificado | ISO-9001-2000 |
Fabricación por contrato | OEM Service Offered ,Design Service Offered |
Capital registrado | 2.5 - 10 Million USD |
Tipo de Propiedad | LLC (Limited Liability Corp) |
Representante Legal / Director Ejecutivo | Michael Lee |
Porcentaje de exportación | 95% |
Volumen total de ventas anuales | 50 - 100 Million USD |
No. de personal de control de calidad | 6 - 10 people |
Persona de contacto | Reus |
Empresa | Plastic Moulding Company |
teléfonos | ******** |
Mobile | ******** |
Fax | ******** |