Barbor

We are pleased to introduce our company , which specializes in the production of components for air conditioning and ventilation. I would like to introduce to you our range of heat exchangers that reduce your heating bills, reduce heat loss areas, and thus will save your money. Some of our product: €Cross-flow heat exchanger €“ efficiency approximately *0% €Rotational heat exchanger €“ high efficiency, even up to *0% €SUPERBLOCK €“ regenerative heat recovery exchanger €“ efficiency up to *5% 1) The cross flow heat exchanger is built from aluminum plates. Special version plates are additionally covered with an epoxy resin layer, between which flows supply and return air, in streams that are either cross-flow or separated from each other. Discharge air flows through every other duct between the plates heating them, and fresh air flows through the remaining ducts, drawing heat from the heated plates. Adventages: efficiency app. *0% leak tightness separation of air streams simple constructions lack of movable parts Technical data: capacity: from **0 m3/h to **0 **0 m3/h / *8, 8 CFM to ****3, 2 CFM size: from **0x**0x**0 mm to ***0x***0x***0 mm / 8, 3x8, 3x3, 9 C to **3, 8x**3, 8x*8, 4 C plate spacing: up to 2.0 mm to *3.5 mm / 0, *8 C to 0, *3 C special version of cross-flow exchanger operation temperature: from **0 °C / **2 °F plate material: aluminum, epoxy covered aluminum 2) The rotary heat exchanger is equipped with a drive unit together with a rotational speed control system.The main part of a rotary heat exchanger is the rotor. It consists of alternatingly coiled aluminum tape (notched and flat) which creates air passage channels. The rotor acts as depositional mass, which heats up in contact with discharged air, in order to give away the heat after rotation and getting into supply (fresh) air zone. Adventages: high efficiency, even up to *0% possibility of heat and moisture recovery small overall dimensions simple structure Technical data: capacity: **0 m3/h to*4 **0 m3/h / **7, 2 CFM fo ***9, 7 CFM rotor diameter: from **0 mm to ***0 mm / **6, 8 C to **4, 2 C rotor width: **0 mm and **0 mm / *8, 7 C and *8, 4 C operation temperature: from **0 °C to *0 °C / *7 °F to **0 °F rotors material: aluminum, aluminum with hygroscopic layer 3) Superblock regenerative heat recovery exchanger. Superblok ensures full utilisation of the air flow surface.Superblock can attain the highest level of heat recovery, of up to *5%.In most cases, it is not necessary to use an additional air heater. During operation in the summer season, the Superblok's original design of regenerative heat exchange means, that is also attains a very high level of cooling recovery from the exhaust air. Adventages: efficiency up to *5% unique construction heat recouvery without compressors recuperation without heat pumps easy maintenance reliability work The price depends on the size of the heat exchanger and the amount of orders. If you have any questions, feel free to contact me. I will try my best to help you. *****