Work flow: Elevating--- Mixing --- Fixed-quantity filling --- Pressure forming --- Mould unloading --- Forming tiles ---Onto the tiles shelf --- --- Stacking --- Curing (24 hours)--- Polishing --- Finished products.

1. At frist,the raw materials are put into the bucket elevator, then deliver to the rolling mixer,at this time,you must add some water into it.

2. After mixing, the mixture come into the dosing feeder,then,measurable mixture that one tile need will put down on the mould below through a small hole.

3. Then,a tile can be formed by high pressure,the pressure is about 125 tons. So the produced tile is very stable and dense.I think the constructor can boldly walk on the paved roof.

4. By the way,the tile need to dry out for about 10 days.Then you can paint.

Mix water, raw material such as cement, stone powder, marble particle, and sand up in proportion and feed the mixture evenly to the main machine of the cement terrazzo tile making machine usage, and then under the high pressure of a hydraulic cylinder and a mould, semifinished concrete terrazzo tiles which become concrete terrazzo tiles after maintenance and painting are produced. If different moulds such as roof tile moulds are applied, roof tiles can be obtained.

Parameter: