Description
RF
Isolator is a two port device that protects RF components in
a system from excessive signal reflection. It is a non-reciprocal
device that ensures that all the power is transmitted from port 1
to port 2, while isolating absorbing/isolating any power incident
at port 2. An isolator is often placed at the in front of sensitive
component sin the Rx/Tx chain to avoid unwanted signals from
damaging sensitive components.
_______________________________________________________________________________________________
Selecting RF Isolators
When selecting a RF Isolator it is important to know the parameters
that you need to specify. Below are a list of the key parameters to
look out for when selecting an isolator:
Isolation
(dB): The level of Isolation from the output port to the
input port. The higher the isolation the better the components are
protected.
Insertion
Loss (dB): The signal loss from port 1 to port 2.
Power
(W): This is the power level that the isolator can handle
while maintaining its electrical characteristics. The forward power
is the level of power that the isolator can handle incident at port
1. The reverse power is the level of power incident at port 2 that
the isolator can absorb.
Configuration:
RF Isolators are available in a number of configurations Drop-In
Packages, connectorized modules and surface mount packages.
_______________________________________________________________________________________________
UIY Inc. RF Broadband Isolator Custom Design available:
•Operating
Frequency up
to*0GHz.
•Connector
Type optionalSMA,N,
K,BNC,2.*2mm,7/*6
DIN and4.***0
mini DIN with
female, jack, male, male to female and plug
genders.
•Power
up
to***0W.
UIY
Inc. provideLow
insertion loss,high
isolation,high
power handling
on RF
Module.
Exceptional customer service and technical support are on hand to
support our customers.
