Car parking equipment stacker

Description

PJS car parking equipment specification
 
PJS Parking equipment is a semi-automatic parking equipment, which can only move vertically, it has two layers and usually used in villa areas or residential area. 
 
PJS is the mini type, which parks two cars, only one pallet on the top, no pallet on ground, to retrieve the top car by driving out the ground car first. So it is suitable for one family with two cars or public garage with valet parking service.
 
1. Main components:
PJS equipment is made of steel structure, pallet,transmission parts, electrical parts, control box, operation box and so on.
1.1. Steel structure
Adopt good rigidity H profiled bar structure. Surface treatment: Deoiling, Phosphorization, Electrophoresis priming, Powder coating.
The equipment is independent, not depending on walls or columns. The structure is simple and firm. All the parts can be installed completely without cutting and welding while installation. No pollution to environment.
1.2. Assembled pattern pallet.
Firm assembled structure, the thickness is 2.3mm. Also it adopts pattern steel to avoid slipping.
Surface:spray painted, smooth entrance, finished edge and corner.
1.3. Transmission parts -Motors and chains
MCN motor from Taiwan, which is special for parking equipment. Lift motor is 2.2kw.
The motor has an automatic brake function. When it is power off, the pallet will be stopped.
Use strong chain, with safety protection, coefficient of safety of chain is 7 times than car weight allowed.
1.4. Electric control system
Every set has one independent control system.
Safety control: electrical security methods.
1.5. Operation box
Operation box is push button style.
 
2. Security methods
2.1. Running warning: When the system is running, there will be alarm with red lamp.
2.2. Emergency stop switch
Every unit has an urgent stop button. When you meet urgent situation, push the stop button, the unit will stop immediately, also it will alarm by sound and light. Before release the alarm, the system would not run.
2.3. Lift location limit switch and over-lift protection switch
There are limit switches and over-lift protection switches beside transmission parts for lift location. Once the first switch does not work, the over-lift switch works, the system will stop, and alarm by sound and light. It can ensure the safety of cars and the system.
2.4.Photoelectricity sensors
The system will stop if someone enters into equipment area while it is running, and alarm by sound and light.
The system check by sensors and will not start action if the car is over limitation of length or height allowed.
2.5. Device to prevent falling of top pallet
2.6. Loop protection
The system has protection switches for power malfunction, such as lack of phase, reverse-order, short circuit, low voltage, and overload.
2.7. Power off protection
There is mechanical brake for power off by accident.
 
 
 
 
 
 
 
 
3. Technical Parameter