Shape: Symmetrical, round rod

Material: Brass/Stainless steel

Glass thickness: 6(1/4")**2(1/2")mm

Certification: CE and European standard.

Packing: Cartons or as per customer requirements.

Test: Pass **-hour acidic solution test.

Sample: We can provide samples for free according to the situation.

Payment Terms: *0% as deposit T/T in advance, *0% T/T before shipment or others.

Glassdoor handle is a hardware accessory that can not be ignored. If a small handle is not well selected, it will look not good decoration and looks not beautiful. There are many seemingly the same glass door hand in the market, but the prices are far from the same. How should we distinguish the quality of glass door handles and how to select the appropriate hardware handles?

1. Look at the appearance of the hand

First of all, check the color and protective film of the handle, whether there is damage or scratch, and judge the quality of the handle. First, study the surface treatment. Good sanding handle should be relatively dim in color. The partition line of semi-sand in the place where the light and sanding intersect should be straight. If it is bent, it must be inferior. A good sanding handle should be a reflection of color such as mirror, There without slight defect.

2. How do you feel when you touch?

The good handle should be very comfortable if you touch, So when choosing to buy, you can try to feel how are you feeling. To see whether the surface treatment is smooth, a good handle edge should be smoothed, there will be no phenomenon of tied and cut hands.

3. Look at the area around of screw hole

When you choose the handle, you need to pay attention to a point, the best choice around the screw hole area larger handle. Because the smaller the area around the handle screw hole, the more precise the handle hole on the board is required. Otherwise, a slight deviation will lead to the exposure of the handle hole. Therefore, in order to prevent this situation, it is necessary to pay attention to check whether the area around the screw hole is too small when you purchasing.