Eco Freindly Waterbased Epoxy Matte Face Floor Coating for Hospital, Factories

Description

Descriptions:
What is water-based epoxy?
Water-borne epoxy is a kind of homogeneous material which is formed by different hydration ways of epoxy resin. Unlike ordinary epoxies, it can be dispersed uniformly in the aqueous phase.
Composition: Epoxy resin, waterborne epoxy curing agent, water.
Mode of action: emulsification.
Scope:
1. All kinds of long-term wet ground, such as basement, underground parking lot, garage, etc.
2. Various factories and warehouses, ground floor without moisture proof layer.
3. It is used for floors requiring strong abrasion resistance and impact resistance, especially for floors requiring forklifts, cars and heavy trolleys.
Features:
1. Complete water-based system, healthy environment, easy to clean and scrub, acid-alkali resistant, mildew-proof and anti-bacterial.
2. Micro-breathable structure, resistant to underground water vapor, easy construction, seamless dust control.
3. Hard coating, abrasion resistance, suitable for medium load.
4. Soft luster, beautiful and bright.
Construction Technology:
1. Construction preparation
1) material: water-based epoxy floor coating, such as base coating, middle coating, surface coating and other related materials
2) tools: substrate grinding tools, vacuum cleaner, batch repair scraper, roller, small agitator, etc.
2. Construction steps
1) plain treatment: polish, repair, remove dust and remove water in accordance with plain conditions.
2) water-based base coating: after the base surface is cleaned, the base coating can be applied.use roller or brushthe basecoating should be uniform with the same thickness. The water-based base coating hasacertainwaterpermeability , which can enhance the strength of the base surface and increase the adhesion of the coating to the base surface.
3) water-based mortar layer: a certain amount of quartz sand is added into the prepared water-based epoxymiddlecoating to make the water-based epoxy mortar, which is uniformly coated with a trowel to enhance the thickness and compressive strength of the coating.
4) waterborne putty layer: apply epoxy middle coating and quartz powder to be the waterborne putty layer, put several layers according to actual needs, so as to level off without holes.
5) water-based surface coating: coat the water-based epoxy surface floor coating twice with a roller. After completion, the overall surface shall be soft and clean with uniform color and no empty drums.
6) Conservation: the surface layer needs to be dried for *4 hours, during which it should be closed to avoid affecting the effect of clean and smooth surface. It can be manned after 3 days and put into use after 7 days of completion and maintenance (subject to *5 degrees Celsius, the opening time shall be moderately extended at low temperature).

Construction diagram:


Specifications: