TY-6 Synthetic latex /emulsion

Description

TY*6 Synthetic latex /emulsion Description
TY*6 product is a styrene ethylene / acrylic copolymer emulsion, small particles, strong adhesion, tough and elastic film/membrane. It has good water resistance and alkali resistance. TY*6 is specially designed for use in configuration, exterior wall primer coating. Its good sealing and alkali resistance, can effectively protect the wall from cracking.
 
Physical & Chemical Properties
Appearance    Microtransparent milky white liquid
Solid content   *9.0±1.0
PH             **8
Viscosity     ï¼ˆ*5℃  NDJ**3/*0）：********0CPS
 
Typical Characteristic
Minimum film/membrane forming temperature   <0℃
Glass transition temperature         5℃
Grain/Particle size                 0 .1
Free monomer                     <0.5
Ionic nature                       Anionic
 
 
HANDLING / STORAGE& TRANSPORT   
It is not expected that this product will give rise to any handling & storage difficulties if properly stored in original packaging or in clean, covered, suitable containers at normal room temperature. It must be protected from freezing and exposures to extremes of heat and cold. The color does not influence the quality of the performance.
 
Storage:  Store in dry and ventilation place at 5°C- *0°C. The lid should be sealed, air humidity less than *0% when without use.
Shelf life:  6  months (packed in originally sealed barrel, from delivery date. Seal the barrel immediately after sampling or using.
Packing: Plastic barrel at *0kg / plastic barrel, or **0kgs / metal barrel
Transportation:Non-dangerous goods