2 Layer Rogers 4350B With Rigid ENEPIG Gold

Description

2 Layer Rogers ***0B With Rigid ENEPIG Gold
 
Basic information:
Name:Antenna high frequency antenna amplifier
Board size:*9**2CM
Surface finish:ENEPIG
Solder mask:Blue
Silkscreen:White
Material:Rogers ***0B 0.**8mm
 Antenna amplifier PCB:
These powerful TV antenna signal amplifiers are designed to overcome signal loss related to long cable runs and splitters. Antennas Direct recommends using a preamplifier for outdoor installations or cable runs. A distribution amplifier should be used to make up for loss due to splitting the signal to multiple TV\'s or for weak signal due to distance from the towers.
Oneseine technology is a professional antenna signal amplifier pcb manufacturer in China
Antenna amplifier knowledge:
An antenna amplifier boosts a radio signal considerably for devices that receive radio waves. Many devices have an RF amplifier stage in their circuitry, that amplifies the antenna signal, these include, but are not limited to; radios, televisions, mobile phones and Wi-Fi and Bluetooth devices. Amplifiers amplify everything, both the desired signal present at the antenna, and the noise. Typical signal noises include: ambient background noise (electric brush noise from electric motors, high voltage sources from, for example a gasoline engine ignition, or large dispersed currents in the vicinity of the desired reception electric fence). To add, consideration must be taken for the noise generated by the amplifier itself and all other electrical noise which may be generated by the device that is to receive a signal, for example a lot of consideration has to go into mobile phone circuitry design to eliminate as much noise from its own circuitry in order to not disturb the desired transmission signals from its own antenna.