Description
The MP****0 water tank is a semi-automatic hot water
dip tank for higher output applications. Designed to be used
in line with our BT series of belted vacuum chamber
machines or as a stand alone unit, the MP****0 hot water tank
offers the performance you want in a dip tank. Maximum
shrinkage is achieved by means of complete submersion in
the temperature controlled water.
The touchscreen interface and PLC controls allow for
simple adjustment and monitoring of current settings.
Fully enclosed and sealed electrical boxes insure years
of trouble-free operation and the stainless steel
construction provides superior corrosion resistance.
how to operation the machine?
1.According to the power cord plugged into a power supply, and
reliable grounding.
2.Press power,turn on the light,adjust and set
the temperature:press Set ,press < switch the
number position,press ∧ ∨ increase or decrease the number,
sv means the set value,pv shows the current
temperature.
Attention:It takes about ****0 minutes to reach the
set temperature.
3.Adjust the time controller,set rise and fall time0 0 s 0 0 s
The first group is fall time, ***9 s adjustable, the second
group is rise time, ***9 s adjustable.
4.Switch to AUTO ,start auto-cycle mode,press
Start,machine start working. Switch to Manual,press
Start,machine start single cycle mode,if press Up and Down
machine jog up and down.
5.When the water low to reach the warning
level,the temperature controller stop working,meanwhile the
light is shining. When you fill the water into the tank,it
resume to work.
6.Press Emergency ,machine stop working
immediately,press Start machine reset to the original
position.
