FOB Price
Obtener el precio más reciente|
Minimum Order
Place of Origin:
-
Price for Minimum Order:
-
Minimum Order Quantity:
1 Set
Packaging Detail:
plywood case
Delivery Time:
After payment 7-15 working days
Supplying Ability:
10 Set per Month
Payment Type:
T/T, L/C
Persona de contacto Bunny
Shenzhen, Guangdong
1.Pick And Place Nozzle Cleaner / Nozzle
Cleaning Machine Features:
A one-time into the *6 nozzle, please wash
large;
Completely solve the dirt is difficult to clean
the dirt impurities;
Though the smaller nozzle aperture but cleaning
is clean;
Cleaning more thoroughly directly extend the life
of the nozzle;
No damage to the surface of the nozzle coating,
reflective plate;
Use environmentally friendly deionized water or
distilled water to clean;
Automatic continuous cleaning, automatic
drying;
Operation is more simple and
convenient;
Increased intelligent water storage check
function
Applicable to all kinds of placement
machine.
2.Manufacturer of Nozzle Cleaning
Machine,Ultrasonic Fuel Nozzle,CW**6
Specifications:
| Air pressure | Air pressure | Compressed air |
| Intake pressure setting | 0.5～0.*5MPa | |
| Injection pressure setting | 0.*5～0.*8MPa | |
| Nozzle injection pressure | ≤0.4MPa | |
| Consumption of gas | ≤**0Nl/min | |
| tube | Intake trachea | ï¿ *2 tubes |
| Drainage tank | ï¿ 8tubes | |
| Cleaning fluid | Cleaning fluid | Industrial deionized water |
| Consumes liquid | ≤**0cc/h(5cc/min) | |
| Storage tank capacity | ***0cc | |
| power supply | power supply | AC**0～**0V |
| plug | *-Pin | |
| Consume electricity | ≤0.1Kw | |
| surroundings | Working temperature | *5～ (But not frozen) |
| Liquid temperature | 0～ (But not frozen) | |
| Working environment humidity | *0～*0%RH | |
| Equipment placed in the environment humidity | *0～*0%RH | |
| dust | 0.1mg/m³(There is no conductive dust) | |
| Corrosive gases | Not allowed | |
| other | Dimensions | **5(L) x **0(W) x **5(H) |
| weight | ～（Contains cleaningsolution***0cc） |
3. Automatic
Nozzle Cleaner, Nozzle Cleaner, SMT Nozzle
Cleaner,CW**6 Contrast with traditional cleaning
：
1〠Artificial wind
guns
â‘ Manual cleaning
efficiency is low, the nozzle surface and the lumen can not be
cleaned, the hole with a steel wire stabbed easily
damaged;
â‘¡ Cleaning effect
difference;
â‘¢ The use of cleaning fluid
and alcohol may penetrate to cause the reflective layer to fall
off.
