Morningtest Temperature Chambers with Stainless Steel Inner Material

Description

 Description
 
Morningtest Temperature Chambers with Stainless Steel Inner Material focus on the required temperature simulation only in order to successfully carry out complex cooling/heating tests between **0 °C and **0 °C. Chambers with Single-stage Refrigeration systems are capable of achieving workspace temperatures down to **0°C. This is fine for many commercial and industrial tests that require low temperatures of typically 0°C, **0°C or **0°C. A single-stage system uses one compressor to directly cool the workspace.

Chambers with Cascade Refrigeration systems are capable of achieving workspace temperatures down to **0°C~**0°C depending on model. This is required for many ruggedized industrial, automotive and military test procedures that require low temperatures of typically **0°C, **5°C or **5°C. A cascade system uses two interdependent compressors.

Note: 
Chamber size could customize
If test specimens have active load during test, please informed us.
This is temperature only model, if need make humidity test, please refer to humidity chambers.
 
 
Model &Working room Size                        
 
MT***1T        (W*D*H) **0***0* **0 mm
MT***5T        (W*D*H) **0***0***0mm
MT***4T        (W*D*H) **0***0***0mm
MT***6T        (W*H*D)***0***0****0mm
MT****0T  (W*H*D)***0***0****0mm
 
 
Performance
·       Control model: Balanced Temperature & Humidity Control System (BTHC system)"
·       Temperature range（Optional）:A: 0~**0℃ B:**0~**0℃ C:**0~**0℃ D:**0~**0℃ E:**0~**0℃
·       Temperature fluctuation: less than or equal to plus or minus 0.5 degree
·       Temperature uniformity: less than or equal to 2 degree           
·       Temperature deviation: less than or equal to plus or minus 2 degree   
·       Heating rate: 1~3 degree per min                     
·       Cooling rate: 0.7~1 degree per min                             
 
Standard Features:
Cabinet
·       Interior stainless steel plate (sus#**4)
·       Baked panel and durable blue powder coated exterior steel plate
·       High density polyurethane froth insulation or fiberglass insulation 
·       Welded structural base frame with removable service panels
·       Dual silicone one-piece door gaskets with vulcanized corners
·       Multilayer tempered heated viewing window; Anti-condensation & frost free
·       One leak-proof *0mm (2 ") access port with plug on the left
·       4 heavy duty casters
·       Fin heat disperse-stainless steel heater
·       PID controlled-stainless steel humidifier
·       2 levels shelves, stainless steel
·       Temperature measuring with PT**0 in air outlet
·       Chamber drain
 
Electrical 
·       Anti-explosive interior lamps 
·       AC Power Cord
·       Fast recovery fuses
·       High pressure protect
·       Phase reversal protect
·       Circuit breaker system
·       System fault status indicators
·       All wiring color coded and labeled for troubleshooting
·       High temperature failsafe limit
 
Refrigeration 
·       Dupont R***4A [No Fluorine] Refrigerant
·       Hermetic-single/cascade compressor
·       Air cooled type (Fins with fan) condenser
·       Oil separator
·       High efficiency plate heat exchanger
·       Inherent compressor overload protection

Controls 
·       Japanese Unique 7" color touch-screen controller 
·       Self prompting operation with **0 programmable segments.
·       **0 days historical date 
·       Real-time and historical curve record
·       Ethernet Connection
·       USB-Connection to save measuring data on USB Stick
·       Online software to connect the PC with the controller to operate from PC
 
 
Calibration 
·       Calibration report for temperature humidity values from manufacturer
 
 
Optional Accessories:
·       Additional cable access ports *0 mm, **0 mm and **0 mm
·       Additional shelves
·       Glove ports to move the test specimen without opening the door
·       Chart recorders
·       Microprocessor (digital indicator) controller
·       **0, **5,**0 or **0 Volts power input optional (depend on requirement)
·       Dry air or nitrogen purge. (Low humidity requirement)
·       Boost cooling system, LN2 or CO2 (enable faster cooling rate and product temperature change rates in an environmental chamber)
·       Additional Pt **0 for temperature measuring on test specimen
·       Additional temperature protection for test specimen
·       Smartphone or tablet pc WIFI monitoring
·       Heat only models available
·       Variable air speed in the test space
·       Water cooled condensers with coil pipe available
·       Calibration certificate for temperature humidity values from 3rd measurement institution.
·       RS***2/RS***5 data interface
 
Please contact Morningtest by sissi(at)morningtest(dot)com for more information and quote.