Single-Arm Hydraulic Anchor Drilling Machine

Description

Performance Introduction
CMM***0 Hydraulic Anchor Drilling Vehicle is a new type of multi function drilling vehicle specially designed for working section width range of >4.6 m and height range of The design characteristics of the drilling vehicle are as following:

1. Reasonable design and good applicability
2. LUDV hydraulic control system & ergonomic operating handles and comfortable operating & low operating power
3. The drilling propulsion mechanism can be moved to different locations and different rotation angle to carry out the construction work of anchor bolts and cables
4. With the lifting platform, the working platform overall moving up and down with the lifting mechanism to meet the demand of construction requirements for different roadway heights
5. The drill vehicle is designed before and after the operation of moving function, which is convenient for workers to operate the vehicle moving freely ,which greatly save time, improve work efficiency.
6. The effective propulsion stroke of the drilling propeller is ***0mm, which can realize the one-time operation for anchor holes of ***0mm and below and the installation for anchor bolts of ***0mm and below
7. Drilling speed:***0mm/min
8. Cable retractable device, electric cabinet, indicator lights, working lights, Pressurized water supply system, cooling system and etc. are equipped.
9. Hydraulic pilot handle control for better control
10. Double cooling(air cooling and water cooling) avoids to reduce the efficiency caused by oil temperature increasing and performance  and improve the service life of hydraulic components
11. Compact structure, small size, energy saving, low noise, high efficiency
12. The drilling vehicle is mainly used in the tunnel engineering and various kinds of well lane support operation, can realize the top help and supporting function, the tunnel supporting  height is less than 7 meters

1. Altitude lower than ***0M
2. Ambient temperature:*5°C*-**0°C
3. Ambient air relative humidity not higher than *5%(*5°C)
4. In the absence of damage to the insulation of the gas or steam environment
5. No long-term water dripping place