Developed for inspection of high frequency circuits used in
portable terminals.Verification of the circuit performance is
accomplished by simply inserting the external plug in the board
mounted receptacle.This action re-directs the circuit from normal
condition to the plug side. Removing the plug restores circuit to
its normal condition.
Applicable frequencies range over a wide band,
from to 6 GHz.
Portable terminals, ETC, notebook computers
(Bluetooth), wireless LAN, POS terminals, GPS terminals, PDA, and
any small devices requiring verification of antenna/circuit
performance.
1. Contact resistance 2. Insulation resistance
3. Withstanding voltage 4. Vibration **0 m ohms max. ***0 M ohms
min.
/ 1 minute to *5 Hz, single amplitude of 0.*5
mm, 2 hours in each of the 3 axis. Acceleration 6 ms duration, sine
halfwave waveform, 3 cycles in each of the 3 axis Temperature: to
**5c Time: to 3 (Minutes) **0 cycles **0 cycles
6. Thermal shock 7. Durability
(mating/un-mating, with corresponding plug)
Phosphor bronze 9T Nylon Beryllium copper
Phosphor bronze
BTypical Data qNORMALLY CLOSED(N.C)~(Not mated
with the plug)
Applicable frequencies range over a wide band, from to
6 GHz.
Packaged on tape-and-reel. Also available with a vacuum
cap over each switch. Several types of SMA conversion adapters
Not mated with the plug Operating
temperature range Rated power Frequency range Insertion
loss.
1. Contact resistance 2. Insulation resistance 3.
Withstanding voltage 4. Vibration **0 m ohms max. ***0 M ohms
min.
No electrical
discontinuity μs or more 5. Shock Contact resistance: **0 m ohms
max. Insulation resistance: *0 M ohms min. Contact resistance: **0
m ohms max.
