Description

Four-color ink UVS series of ads
Four-color ink UVS series of ads is to be able to meet the high-speed printing UV UV-curable screen printing inks, the product has good adhesion, flexibility, bright colors, excellent weather resistance and other advantages.
Scope: apply to all types of soft plastic sheet printing, PP synthetic paper, PVC stickers, gold and silver cardboard
Product Content: UVS****3 four-color yellow, UVS****3 four-color red, UVS****3 four-color blue, UVS****3 four-color black, UVS****0 varnish (descending creams), UVS****0 full-page Finish oil.
inks Product Features:
a, UVS series of four-color ink has excellent adhesion, low odor, good flexibility, good printability, dot clear, colorful.
b, tinting strength (**0% ***0%), the fineness ≤5um, light resistance (**8), outdoor weathering for three years can
c, good curing speed, 3.5KW, *0M / MIN can be completely cured, printed product has a very good flexibility, trapping four or five times after folding edge does not burst
d, after UV curing inks, alcohol-resistant, good water resistance.
e, ink, bright color, high gloss, no surface and then covered with varnish.
pad printing ink Technical Parameters: 
Test items
test result
Test Conditions
Ink fineness
≤5μm
Fineness gauge
Curing conditions
OK
3.5KW UV light, *0m / min, tack
Alcohol resistance
good
**0 Chris, *9.6% of the alcohol wipe *0 times missed the end
Adhesion
OK
3M adhesive tape test
Colour
≤1.5
Separation device
Printability
OK
******0 mesh printing test
Weather
**8
Weathering Tester
Instructions:
a, UVS series of four-color UV ink is generally used directly, can not be mixed with other ink
b, lowering the viscosity can add UVS***6 Thinner
c, lower color density can be added drop Segao UVS****0, according to the proportion added, without any side effects
d, an increase hiding or dilute color vividness can be adjusted plus white ink.
e, UVS series ink applied to fully automatic screen printing presses, semi-automatic screen printing machine, printing performance is good.
 
Attention to the problem:
a, black ink purple line penetration at the poor, it is recommended on the first color printing; color sequence is: black ink / blue ink / Red Ink / yellow ink.
b, temperature *0º**5º appropriate, pressroom generally best to install fluorescent tubes.
C, although the composition of the ink is low irritant, but try not to use skin contact, if the glue should immediately wash with soap and water.
Note: the above the resistance test result data of the company under the experimental conditions tested, not as a guaranteed value.