Description
The PP*2 ink for high light ink, and ordinary PP ink compared with
the broader printability, not only suitable for screen printing,
but also very suitable for pad printing. Especially high
concentration of color printing on dark substrates, reflecting a
good hiding. PP*2 ink for PP substrate has excellent adhesion and
good chemical resistance. Printable in pen, PP cups, paint bucket,
beer turnover box, battery box, calcium plastic films, toys and
other products
Regulation:
.conventional performance marked:
Luster High light.
Printability Material Treatment, or treatment of PP material.
Treatment of PE, powder paint surface, PBT material.
Ink appearance Concentrated slurry.
Drying time Dried at room temperature (*5 ℃), the table stem ***0
minutes, hard work ****8 hours.
Resistance to alcohol Cotton ball soaked in alcohol and **0 grams
of pressure ≥ **0 times.
Grease resistance Bad
SCREEN PP INK WITH TEST
IV.Operation of the warning and precautions:
1, the choice of diluent: drying agent PP**0, the slow drying
agents PP**0
Some PP plastic surface containing a large number of release agent
or plasticizer may affect the adhesion of the ink.
The processing method: Available PP treated water to the printing
surface wipe processing, can improve ink adhesion.
3, prior to printing inks should be fully stir, then add ****5%
thinner and mix thoroughly after direct printing.
Due to the complexity of the material properties of the PP, batch
before use, should be a small amount of trial and fully confirm the
ink and materials match.
4, PP*2 ink and different series and brand inks are generally not
interchangeable blending, in order to avoid adverse reactions.
5, PP*2 ink should be stored in a cool, dry place, tightly sealed
after use, be taken to avoid contact with open flames and high
temperatures.
6, PP*2 ink shelf life of 2 years.
PP Printing ink
Test methods;
1, printed
materials: flame treatment of PE material shampoo bottle.
2, screen: **0
mesh / inch.
3, the scraper: *5
° PU scraper.
4, dry: UV
curing.
5, Color: **2 -
special white, **2 a-Haili crystal blue. (Plus 3% B*5 curing
agent)
Note: The above test results for our laboratory measured, for
user\'s reference. The results will be slightly different, user in
bulk before use, should be adequate tests to confirm the different
colors and printed material.