Description

* Medical Orthopedic Fiberglass Synthetic Casting Tape
* *3 years professional manufacturer
* FDA CE Certification
* Various Colorsto Choose
* ***5 Working Days for Delivery
* Free Samples Offered forQuality Test

Welcome to contact us
Sales: Elsa Lee
Skype: elsa.lee.lf
Tel: **************8
Mob: **************6(WhatsApp)

Description & Properties
Ansen Medical Orthopedic Fiberglass Casting Tape is made of knitted fiberglass fabric or polyester fabric, and water activated polyurethane resin. It uses environmental friendly materials. This new technology allows the products have manyobvious advantages that can weight out of the traditional plaster of paris.
 
Material: fiberglass or polyester fabric
Application:  it is mainly used for the external fixation of fracture or sprain to make the bone heal in orthopedics, plastic surgery and general surgery.
 
Core Advantages
 High Strength, Light Weight:
   More than *0 times harder,1/5weight of the traditional plaster bandage. And easier toget cut.
 
 Molding Fast:
    It begins to mold in **5 minutes after open the package and could bear weight after *0 minutes,whileplaster bandage need *4 hours for full concretion.
 
 Good Air Permeability:
   Unique knitted net structure to make the bandage many holes in the surface to keep good air ventilation and prevent skin damp, hot or itchy.
 
 Excellent X-ray Radiolucency:
    It is convenient to take X-ray photos and to check the bone healing without removing the bandage.
 
 Waterproof:
    The moisture absorbed is *5% less than plaster bandage, even on the situation of the patient touching the water, taking a shower, it still can keep dry in the injured part.
 
 Environmentally Friendly:
    Material are environmental friendly, it will not produce polluted gas after being burn down.
 
 Simple Operation:
Room temperature operation, short time, good molding feature.
 
Usage
1. Wear the surgical gloves and choose the proper specifications. 
2. Put the cast padding or stockinet on the fixed part. 
3. Open the package and take out the cast, Immerse the cast in room temperature water at **5 seconds and press **3 times, take it out and squeeze out the excess water. 
4. Wrap the cast spirally on injured parts with 2~3 layers, overlapping the previous layer by one-half or two- thirds the width of the roll.
5. shape according to the need, smooth and rub the surface to achieve good contact between layers.    
6. Use the electric cast saw to cut and remove it.
 
Storage & Warranty
Medical Orthopedic Fiberglass Synthetic Casting Tape Cast Tapes

• Storage at room temperature
•  
• Shelf-life: 2 years