LM22674MRE-5.0/NOPB

Description

LM****4/-Q1 The LM****4 incorporates a voltage mode constant frequince PWM architecture, in adition,, input voltage feedforward is used to stabilize the loop gain against variations in input voltage. This allows the loop compensation to be optimized for transient performance. The power MOSFET, in conjunction with the diode, produce a rectangular waveform at the switch pin, that swings from about zero volts to VIN. The inductor and output capacitor average this waveform to become the regulator output voltage. By adjusting the duty cycle of this waveform, the output voltage can be controlled. The error amplifier compares the output voltage with the internal reference and adjusts the duty cycle to regulate the output at the desired value. The internal loop compensation of the -ADJ option is optimized for outputs of 5V and below. If an output voltage of 5 V or greater is required, the *5.0 option can be used with an external voltage divider. The minimum output voltage is equal to the reference voltage, that is, 1.**5 V (typ).