Description

DC type is a one-way clutch wedge holder but not the inner ring and the outer ring. 

         • This model must meet customer inner and outer bearing support axial and radial loads, and grease and seal their own design. 

         · Irregular actuation contact surface of the sub-space tolerance must be within the range of the width of the outer ring and the inner ring of the non-contact surface is less than the size of the "e", the contact surface should not have any grooves to ensure proper function. 

         · Original provides standard type of inner and outer ring. 

         · If you had to manufacture hardened steel axis of the workpiece and the machine set into the wall directly. 

         · Grinding treated contact surface hardness of HRC *0 ~ *2 hardening depth must be greater than 0.6m.

         · The internal contact surface hardness of HRC *5 ~ *5, the surface smoothness of the contact surface must be less than *2 CLA, the contact surface of the acceptable maximum width of *5mm skewness skewness of 0.**7.