SKYPE : mfbalmustafa - whatspp
: + *0 **5 **0 *1 *5
SC Series Belt Driven Rotary Screw Air
Compressors
promises
suitable, trouble-free and high performance for every kind of
application with its ESC series oil-injected rotary screw air
compressors. Manufacturing and assembly of every single part of
these compressors, in which latest engineering software is used
during design and analysis phases, is realized considering
international quality standards.
ROTARY SCREW BLOCK
• Block contains new generation
bearing system in which the bearings with three times more load
carrying capacity than the standard designs are
employed.
• Gearboxes are chosen with respect to
AGMA (American Gear Manufacturers Association)
standards.
MAIN MOTOR AND DRIVE
SYSTEM
• Driving the gearbox shaft is
realized by direct-drive mechanism with a flexible coupling placed
between rotary screw block and main motor shaft.
• In the absence of belt and pulley,
noise and vibration levels get noticeably lower.
AIR SUCTION SYSTEM
• With its simple design consisting of
three control block units, a solenoid valve and a control cylinder,
periodical maintenance services of the suction regulators are
easily and quickly realized.
• With the suction valve which gets
fully perpendicular position when its opened, almost straight and
unidirectional airflow, increased air outlet area by %*5 with the
new profile design, the suction regulator promises low pressure
drops and high performance.
• More effective separation is realized
at less volume with the progressive type, deep bedded and meshed
separation layers.
• Less than 3 mg/m3 of oil
density is transferred with compressed air during
separation.
COOLING
SYSTEM
• Four-way thermostatic valve
lengthens the lifecycle of oil and eliminates the risks of
malfunctioning by preventing condensation at low
temperatures.
• New fan seats are employed to
provide easy access and short time periods for clean-up during
maintenance service.
SAFETY AND WARNING
SYSTEMS
• Phase order, absence and instability
control
• Rotary screw overheat
control
• Separator dirtiness warning
system
• Safety valve for separator
tank
• Emergency stop button
• ESC series has LCD control panel
indicating operational and service functions in the way that users
from every level of experience can easily
understand.
• While designing the
electrical cubicle, the products which are produced by globally
accepted brands are selected.
CANOPY
DESIGN
• Ergonomic design that provides
easiness for maintenance service by enabling access to every part
of the compressor.
• Vibration pads produced from special
rubber material to eliminate vibration and its
consequences.
• Flameproof canopy overlay that
minimizes noise.
STANDARD FEAUTURES
• **0V/3 phase/*0Hz IE2 efficiency
class IP*5 main motor
• Demountable acoustic
canopy
• Micro-glass fiber pre-filter in EU3
norm
• Dry type air intake filter at 3
micron resolution
• Electropneumatic on-off controlled
suction valve
• Thermostatic valve
• Motor drive system with star-delta
connection
• Factory-filled oil with ***0 working
hours lifecycle
OPTIONS
• Water + air (Hybrid) cooling system
with heat recovery
• Water separator
• Soft-starter
• IE3 efficiency class main
motor
• Power grid options other than **0V/3
phase/*0Hz
