Description
VERSION: OP.COM ***2
V1.*9
Functions:
1. It
covers almost all for O.pel cars, even new cars with CAN-BUS based
diagnostic, such as Vectra-C, Astra-H,
Zafira-B.
2. The program lets you
to read out and clear fault codes, shows you live data, lets you to
perform output test, and supports remote, and key
programming.
4. Since for O.pel uses
many pin in the OBD connector, the diagnostic interface works as a
multiplexer, and selects the appropriate pin for
communication.
PIN3, PIN7, PIN8, PIN*2 = Serial Link
(ISO***1, KW*1, KW*2, KWP***0)
Full
status information (Present, Not present,
Intermittent)
7. The
program shows you measuring block information on many control
module, you can choose anything from the list on your
own.
You can
also run output tests on many
controllers.
PIN*-PIN*1
HSCAN -
Dual-wire, High Speed CAN-BUS, **0 kbps
SWCAN -
Single-wire, Low Speed CAN-BUS, *3.3
kbps
*0. You
can also reset, and program the following immobiliser related
items: ECM, BCM, IPC.
You can
also reset, and program the Service interval reminder on Astra-G,
Zafira, Corsa-C, Meriva
2. The speed of the communication
over the USB-BUS is enough to handle the awesome speed of the
High-Speed CAN-BUS systems, which is currently **0kbps. This is the
main reason, why only the USB port based interface is available for
CAN-BUS.
