Description
Our Protocol
Converter provides cost-effective and
scalable conversion.
The product has a high pedigree of worldwide signaling interconnect
in many countries catering to both a small interconnect and large
international points of presence.
A comprehensive operation administration and maintenance interface
provides complete onboard or remote control of the unit allowing
real-time configuration of system resources.
The MG-SIEX is a solution that provides a
communication transformation between Modbus RTU/ASCII
protocol nd Modbus TCP/IP protocol. All the devices, as long
as it has the RS**5/RS**2 ports, can be connected to Modbus TCP/IP
newwork through this geteway. In thus case, it enables the low
speed serial device connected to the high-speed Ethernet, to
realize high speed data transmission.
Technical Parameters:
*
Working mode: Transmission mode, address mapping mode,
optional.
*
Numbers of Ethernet ports: 2 ports of RJ*5, 2KV surge protection,
*0M/**0M auto rate adaption.
*
Network protocol: Ethernet, APP, IP, TCP, ICMP.
*
Numbers of TCp connection ports: Max.*0.
*
Numbers of serial ports: Double lines RS**5 or single line for
RS**2.
*
Serial communication mode: RTU or
ASCII,optional.
*
Baud rate: 1.2~**5.2Kbps.
*
Calibration mode: None, odd check, even check.
*
Numbers of slave devices: Maximum *2(without
relay).