Damisol3042FL_X1

Description

The H level of
The mechanical properties of excellent and durable.
Is of high flexibility
The company passed the UL certification (certification number: E****1)
The flame retardant of FH*1
summary
High temperature resistant single component, thixotropy and flame retardant unsaturated polyester resin; resin micro yellow, Damidil ***7 as reactive diluents and thermal crosslinking with class h above the lasting high temperature resistant properties.
UL H grade, certification number: E****1.
Due to the high amount of varnish covered, high reaction of ***2 FL X1 is a very stable one component products, especially suitable for transformer products of the VPI process, and is applicable to the motor and.
application
VPI process for dry type transformer in all kinds of high temperature resistant, and low voltage motor and motor.
operation
***2 FL X1 product because of thixotropy is mainly used for VPI process for transformer products and for dipping or roll leaching process.
Crosslinking process: at least **2 **0oC hours. (depending on the operating unit)
High temperature and long time to achieve high mechanical or chemical resistance of the favorable.
The resin should avoid contamination, and be placed in the environment of "*5oC"..
packing
*0kg.
**0kg barrel
storage environment
When the container is stored in a closed container, the period of validity is 6 months (*3oC) or *2 months (*5oC).
Such as stored in the tank operation, it is recommended to keep in dry air at standard atmospheric pressure; at the same time, suggest tanks do not put full, up to capacity of *0%.
From time to time to open the tank cover and mixing resin, will make oxygen penetrate into the resin, so as to improve the validity period.
Health and safety
Avoid contact with skin and eyes.
Operate in a ventilated environment and keep away from fire.
.
The flash point is greater than or equal to *2 DEG C
Viscosity (Brookfield, *3 C, *0rpm) mPas **0 + **0
Viscosity (Brookfield, *3 C, 2.5rpm) mPas ***0 + **0
Gel time (**0 C) Mn 4 ~ 7
VOC% less than *0 ISO ******3
Mechanical properties
The bond strength (*3oC) daN *5 IEC ***3
The bond strength (**0oC) daN *0 IEC ***3
The bond strength (**5oC) daN *8 IEC ***3
The bond strength (**0oC) daN 8 IEC ***3
Chemical properties
Water absorption (7 days *3oC)% less than or equal to 0.*3 ISO *2
Chemical resistance (2% NaOH)% *0.*4 ISO **5
Electrical performance
The insulation strength (*0% R.H, *3oC) kV/mm = **0 DIN ****8 / VDE ***0