Damisol 3041-2 HIR/300

Description

Of grade H
The mechanical properties of excellent and durable
Of high toughness
Company passed UL certification (certification number: E****1)
summary
Two components of high temperature, light yellow transparent unsaturated polyester resin, using Damidil ***7 as reaction diluent, thermal crosslinking with H
The level of persistent high temperature properties.
UL H grade, certification number: E****1.
This product is a two-component product, need to use 1% Damicat ***6, namely the resin products *0kg need to be equipped with **0g ***6.
The viscosity of the product is **0mPas, but the series of products are **0mPas and viscosity of **0mPas products.
application
Applies to coil, especially motor stator coil and high mechanical strength of the dipping, rolling and continuous dip dip.
With 1% of the ***6, the reaction activity increased, the crosslinking process becomes short; if the ratio to 2%, can accelerate the crosslinking process.
operation
With 1% Damicat ***6 *****2 HIR products can be used in any automatic or manual dipping equipment. According to the different
Type selection of motor parameters and the viscosity of resin. HIR *****2 series is now available in **0mPas, **0mPas and **0mPas
Three viscosity specifications in order to avoid user dilution adjustment and the risk of operating errors.
For fine wires it is difficult to penetrate, ***7 can be used to dilute the required low viscosity.
Crosslinking process: Copper test, **0oC ****0 minutes, **0oC minutes *5.
The resin can be improved by increasing the catalyst content (2%) in order to accelerate the crosslinking process.
The resin should avoid contamination, and be placed in the environment of "*5oC".
As is stored in large tanks, must regularly test the viscosity change.
After the mixed catalyst, ****-HIR Damisol products can be *3oC conditions at least stable for a week.
packing
*0kg.
**0kg barrel
storage environment
When the two components HIR *****2 products are stored in a closed container, the effective period is up to 9 months (*3oC) or *2 months.
(*5oC).
Such as storage tank, it is recommended to keep in dry air at standard atmospheric pressure; at the same time, suggest tanks do not put full, the
Up to *0% of capacity.
From time to time, mixing the resin, the oxygen will penetrate into the resin, so as to improve the validity period.
Health and safety
Avoid contact with skin and eyes.
Operating in a well ventilated environment, away from fire and.
Product data
The physical properties of unit data reference standard
Shore D hardness *8 ISO **8
The flash point of oC = *2
Viscosity (Brookfield, *3oC) mPas **0 + *0
Gel time (**0oC) Mn 2 ~ 4
Mechanical properties
The bond strength (*3oC) daN *4 IEC ***3
The bond strength (**0oC) daN *3 IEC ***3
The bond strength (**5oC) daN *7 IEC ***3
The bond strength (**0oC) daN *5 IEC ***3
Chemical properties
Water absorption (7 days *3oC)% less than or equal to 0.*6 ISO *2
Chemical resistance (2% NaOH)% 0.*9 ISO **5
Chemical resistance (*0% HCl)% 0.*4 ISO **5
Electrical performance
The insulation strength (*0% R.H, *3oC) kV/mm = **0 DIN ****8 / VDE ***0