Damisol 3042-700

Description

Of grade H
The mechanical properties of excellent and durable
Of high toughness
Company passed UL certification (certification number: E****1)
summary
One component of high temperature resistant, light yellow transparent unsaturated polyester resin, using Damidil ***7 as reaction diluent, thermal crosslinking with H
Durable high temperature resistance.
H UL level, authentication number: E****1.
The product is very stable single component product. It can be used for any sustained immersion process (dipping, roll dipping and dipping); in
Suitable viscosity conditions can be used for the VPI process.
application
It is suitable for all kinds of coils, especially the continuous immersion process of motor and stator winding with high mechanical strength.
Dip).
operation
***2 products can be used for any automatic or manual impregnation, roll or drop leaching process. Because it is low viscosity, so that the production of
The product has good permeability in the small parts of the parts, and even does not need parts for preheating. According to different types of motor selection
Resin parameters and viscosity. ***2 series now has **0mPas and **0mPas two kinds of viscosity specifications. For hard to penetrate thin
Wires can be diluted with ***7 resin to a lower viscosity. High viscosity specifications can be developed according to customer requirements.
Crosslinking process: at least ****5 **0oC minutes.
High temperature and long time to achieve high mechanical and chemical resistance.
The resin should avoid contamination, and be placed in the environment of "*5oC".
Periodic test viscosity change.
packing
*0kg.
**0kg barrel
storage environment
One component ***2 product, stored in a sealed container, the effective period of up to 6 months (*3oC) or *2 months (*5oC).
Such as storage tank, it is recommended to keep in dry air at standard atmospheric pressure; at the same time, suggest tanks do not put full, the
Up to *0% of capacity.
From time to time, mixing the resin, the oxygen will penetrate into the resin, so as to improve the validity period.
Health and safety
Avoid contact with skin and eyes.
Operate in a ventilated environment and keep away from fire.
Wear safety gloves and eye during operation.
Please check the complete information on MSDS.
Product data
Physical performance unit data reference standard
Shore D hardness *8 ISO **8
The flash point of oC = *2
Viscosity (Brookfield, *3oC) mPas **0 + **0
Gel time (**0oC) Mn 4 ~ 7
VOC% less than *7 ISO ******3
Mechanical properties
Bond strength (*3oC) daN *5 IEC ***3
Bond strength (**0oC) daN *0 IEC ***3
Bond strength (**5oC) daN *8 IEC ***3
Bond strength (**0oC) daN 8 IEC ***3
Chemical properties
Water absorption (7 days *3oC)% less than or equal to 0.*3 ISO *2
Chemical resistance (2% NaOH)% ISO *0.*4 **5
Electrical properties
The insulation strength (*0% R.H, *3oC) kV/mm = **0 DIN ****8 / VDE ***0