Lithium Silicate Concrete Sealer Professional Manufacturer

Description

 Lithium Silicate Concrete Sealer Factory Supply 

Professional Manufacturer, Core Technology! 
International First-class Quality, But Competitive Price!

Provide OEM service.
 

Product Description: 

Nano Lithium Silicate Concrete Sealer  (CS) is an inorganic, lithium-silicate chemical solution especially for the hardening/densification of some floors, its colorless, odorless, environment friendly, non-toxic, non-flammable, free of VOC and easy to use. It produced by inorganic silicate, catalysts and other additives through high temperature emulsification. It is a low alkaline active-copolymer, can efficiently penetrate into the concrete structure, seal the pores and continually increase the floors hardness, strength and the capacity of anti-penetrating, and after polishing, can get an immediate and permanent sheen.

Working Principle: 

By efficiently penetrating into the concrete structures, CS reacts with the free alkalis presented in the concrete and forms Calcium Silicate Hydrate (C-H-S is the main source of strength of concrete) , which fills and seals the pores, solidifies into the integral part of the concrete and finally leads to a more compact and hard structure. After one-time application of CS, it will continually improve the floors comprehensive performance and give the floors permanent protection, such strength enhancing, hardening, dust-proofing, anti-corrosion, anti-permeating, etc . In addition, after polish, it will give the floor an immediate and permanent gloss.

Characteristic and Functions: 

*1. Sealing and hardening the concrete structure;
*2. Improving concrete floors compressive strength,  friction coefficient, wear-resistance;
*3. Dust-proofing;
*4. Anti-permeating of oils and greases, etc; 
*5. Anti corrosion of acid, alkali and salt;
*6. Anti-skidding, and car tyre marks;
*7. Reduces or eliminates hairline cracks of new concrete floors. 
*8. After polish, giving the floor an immediate and permanent marble sheen; if not polish, the sheen shall appear little by little;
*9. Treated floor is easy to clean, and dont need any special maintenance. 
*0. Be applicable to both new or old floors.
 

Recommended Application: 

CS is suitable for concrete floors, cement mortar floors, colored aggregate floors, emery floors, terrazzo floors and self-leveling floors. 

 

Method of Using:

1. Shake well before using.

2. Coverage: About **5m2/kg

3. If a matt surface is wanted:

Spray(or brush/roll) CS evenly and wet the concrete surface, keep the surface wet at least *0minutes, the area become dry too quickly, need an immediate additional spraying.

4. Air temperature at ***5℃, and relative humidity ****0% is the best, when temperature >*5℃, please sprinkle water to cool down the surface first.

5. If a gloss surface is required, please refer to following process:

1). Coarsely grind the floor by *****0mesh (wet or dry grinding) abrasive disc;

2). Spray CS evenly on the floor, coverage: 0.**0.2KG/m2, keep the floor wet at least *0minutes;

3). Grind to **0mesh (wet or dry grinding);

4). Polish to **0mesh (dry polish);

5). Spray CS again, coverage: 0.1KG/m2;

6). Polish to ********0mesh (dry polish);

6. Avoid the surface suffer from water, rain and freeze within *4h after construction, after 4hours, the floor can be walked on, and after 7days, the treated surface can be open to heavy traffics or start following works.

Packing:  20KG/ Pail, **0KG/Pail i.e. 5 US Gal/Pail, *5 US Gal/Pail(HDPE Pail)