Description
Sintered Wire Mesh
1. Characterictics:
This sintered wire mesh is made from several layers of square
woven. As the high porosity of the square woven ,this kind of
sintered wire mesh has the characters of good permeability,low
resistance and high circulation. Mainly used in filtration of gas
and liquid.Beause of the wide selectivity of the support layer,the
construction can be produced according to customer's
requirement.
Material: Standard material is
SUS**6(AISI**6),SUS**6L(AISI**6L).
Size: Standard size are **0×***0mm,**0×***0mm, other sizes in the
above-mentioned range are also available according to customer's
needs.
2. Characterictics:
Large areas , From 1micron to **0micron it all has the well
filtration performance .
Steady filter rating, As to the two protective layers and sinter
arts, the mesh of the filter layer is not easy to change.
High mechanical strength. Excellent resistance to pressure ang high
mechanical strength due to the fourth and fifth layers
reinforced.
Washability.Easy to wash, especially back washing owing to the
surface.
Heat resistance. Heat resistant up to **0℃.
Corrosion resistance. Corrosion resistance as to a result of
adopting SUS**6L.
Tractability.Suit to cut, punching, warp, tension and jointing.
Material: Standard material is SUS**6L (AISI**6L).
Size: Standard size are **0×***0mm,**0×***0mm, other sizes in the
above-mentioned range are also available according to customer's
needs