DLX-PFS Series 10/100M POE Ethernet Fiber Optical Switch

Description

Product Introduction DLX-PFS series *0/**0M Ethernet Fiber Switch is included one **0M fiber optical port and four or eight POE *0/**0M Ethernet ports. It has the function of photo electricity switchover between 8channels *0/**0M Ethernet ports and **0M optical por. Adopts single port full-power technology, and single port supports Max.*0W and feeds enough power to Array IR CCTV cameras. Auto-detect and recognize IEEE **2.3AF/IEEE **2.3AT standard PD (Powered Devices) and feeds power to it. Supports smart power management, if the power of PD over *3W, the system will stop feeds low-priority devices. Has smart POE auto-recognized system to protect devices from overflow current and over -voltage etc. Adopts Auto-standby mode and cable distance detection management to ensure the switch has excellent energy saving capability. Using imported original industrial components and Gold-plated PCB. All RJ*5 ports adopt advanced Self-healing multi-stage lightning protection design, have high-level lightning, surge and ESD protection. Support 1*1 dual power supply backup, can be used in harsh conditions for long time.

  Product Feature ●Adopts import industry PSE chip and Taiwan YDS transformer
●Single port full-power technology, and single port supports Max.*0W
●Supports IEEE**2.3AF and IEEE**2.3AT protocol, Auto-detect and recognize IEEE **2.3AF/IEEE **2.3AT standard PD (Powered Devices) and feeds power to it
●Supports smart power management, if the power of PD over *3W, the system will stop feeds low-priority devices
●Supports Auto-standby mode and cable distance detection management, if no devices been connected, then auto-standby to save energy, if cable distance less than *0meters,then will use Lower transmission power
●Smart POE auto-recognized system to protect devices from overflow current and over -voltage etc.
●2K MAC address
●1/2/3/6 lines or 4/5/7/8 lines power supply optional, supports all PD devices
●Support 1*1 dual power supply backup, Supports *4hours power feeds
●Anti-lightning and ESD protection for all Ethernet ports, power ports
● Immersion gold PCB board, Industry grade components
● Multi-services Flexible Configuration on the Same Platform
● Auto-negotiate to NIC/HUB and MDI/MDI-X
● Support VLAN Network isolation and BSTM broadcast storm-control setting
● Indicators for Power Supply, Ethernet etc.
● Supports line speed switching of all ports and in *4~***6 frame length can reach line speed
● Standard: Full-duplex adopts IEEE **2.3x standard, Half-duplex adopts Back pressure standard
● Wall mounted installation
● Transmission distance: 5km(multi-mode),*0km,*0km,*0km,*0KM,**0km,**0km optional (Single-mode)indicator for Power Supply, Ethernet etc.

  Technologies reference