Description

*The 3ply, 5ply, 7ply, and multi-function corrugated cardboard production line mainly consist of the following 
 equipments: Mill Roll Stand, Pre-conditioner, Pre-heatr, Auto-splicer, Single Facer, Conveyinh span Bridge, 
 Multi-ply Pre-heater, Glue Application Machine, Double Facer, Slitter Scorer, Cut-off, Conveyer and Stacker, 
 Glue Making System, and Electric Control System etc.
*Paper output speed varies from **0m/min***0m/min
*Valid Breadth: ***0mm****0mm
*Total length between *5m to **0m
 
Brief Introduction Of The Working Proceure
Feed the paper roll into the Mill Roll Stand. In the Pre-heater, the paper roll is heated and its moistuure and 
tension force are adjusted. The paper roll is pressed to a corrugated shape and fed with glue in the single 
facer, and then it is agglutinated with another paper roll to form a piece of single face corrugated cardboard. 
The conveying span bridge tidies and transports the single face cardboard to the muli-ply pre-heater for the 
second pre-heat. The glue application machine puts glue on the sharp top of the single face corrugated car
-dboard before it is heating agglutinated with another paper roll in the double facer. After cooling formed in 
the double facer.A piece of corrugated cardboard is made.According to the requipment of the order.The cor
-rugated cardboard is cut precisely in the slitter scorer and the cut-off. A piece of rectangle corrugated 
cardboard is finished. After quantity counts and being piled up in the stacker, the finish cardboard can be 
conveyed out. An entire working procedure of the production line is completed.