Description
• We offer high quality edged birch boards, cut from quality
white European (Baltic) birch. We set our suppliers higher
requirements for delivery, so we can be sure about the quality of
our goods that we send to our clients. Quality and customer
satisfaction is our priority.
• AA / AB / BB / ABC grades , cut out from good quality logs
either dry or fresh, diameter from *2cm+up , red heart plank will
not exceed 5% of total quantity , and about this 5% red heart plank
only in one side.
• We can do any width (min is *0mm) , and be aware of that
we are not allowing negative tolerance!
• Thickness : *9/*0/*1/*2/*4/*5/*8/*0/*2/*3/*5/*8/*4/*5 mm -
be sure that we work only with positive tolerance 1mm*2mm.
• Length is up to 6.0m (most of the time we supply 2.**3.0
meter long boards) and up with positive tolerance **0mm , not
allowed negative tolerance.
• Measure of width is made, after kiln drying, in the middle
of the plank on the top side from bark to bark and if it is fresh
then it is also made in the middle of the plank. Moisture is
***2%.
• Width is marked on each plank, all measurements are pointed
in specification which is provided with the load accordingly .
We accept inquiries
for edged birch boards of any size demanded by customer, so do not
hesitate to make inquiry!
Best Regards,
Tomass Freimanis
CEO - Balt Wood Enterprise
