Stirrup Bender WG16B

Description

The particular patented straightening system, constituted by sets of horizontal and vertical rollers that can be automatically adjusted, is integrated with 4 pulling rollers that eliminate the torision, which is driven by servomotor, thus ensuring a perfect straightening accuracy.



The bending and cutting unit, driven by servomotor, is equipped with turning and retractile bending pins. After received a signal from computer, the cutting unit starts and cut in the twinkling guaranteed the tolerance of the stirrup.



For this CNC stirrup bender, many electric and pneumatic parts are imported from Japan and German, such as PLC, servomotor and reducer.



1)A stirrup available to the most *0 bends; **0 different stirrups parameter can be stored in the computer memory. from diameter ***6mm



2)The machine needs no pause and stop while processing stirrups of any shapes and adjusting bending angle.



3)With self-diagnosis, there are two standard exit, throngh which the electric encoder can be joined.



In traditional stirrup processing technology: Stirrup is formed step by step by simple machine from coiled wire, according to the following phases: Straightening, cutting and bending.



Automatic stirrup bending machine, controlled by CNC, quickly and automatically activates as follows: Measuring, straightening, cutting and bending, with high effeciency, instead of ****0 workers, which is the first automatic machine in Europe steel forming industry and is coming to China firstly too.