Description

Used for motorcycle shock absorbers for the front, drawn the material from ¢ 4mm carbon steel spring wire, stereotypes after wound into type, the height of the finished product is **8mm, the surface immersed preventing rust oil to antisepsis.(follow attached some technical requirements)
Technical Requirements:
1) Total number of coils:*4.9
2) Number of active coils:*2.9
3) The end part of the burr must be removed
4) The end surfaces of polished no less than 3/4 the circumference
5) The outer diameter *0.2
6) Surface Immersed preventing rust oil