Description
APEC
Brand AIW
series Ironworker
features multiple functions, including: punching all kinds of holes
(round hole, square hole, oblong hole), louver punching, steel
plate punching, flat bar punching, angle steel punching, C-channel
punching, H-beam punching, I-beam punching, profile steel shearing
(channel shearing, I-beam shearing, round/square bar shearing, flat
bar shearing, T-bar shearing, steel plate shearing, angle steel
shearing), notching, press brake, angle steel notching , bending,
pipe notching. It comes standard with: quick-change coupling nut
& sleeve, squaring arm with scale, electronic back gauge,
gauging table with stops, punching base table, safety guards and
more.We can design any special tools according to your metal
fabricating requirements.
APEC Brand AIW-S
series is improved machine on the base of standard
AIW series. It goes along with automatic holding system and
temperature cooling system.
Automatic Holding System:
There is automatic holding system in angle steel shearing and plate
shearing work position. The holders will fix the position of
work-piece, in this way, the accuracy is better and more safety for
workers meanwhile save time and Improve working
efficiency.
Temperature cooling
system: Once start the machine,the cooling system
starts working automatically.The hydraulic oil temperature always
stays at *0 degree or less.It is applicable and safety for
processing in quantities and long time.
Features
1. High Quality Components & System
a. Main Electrical component: Schneider, Germany.
b. Valve: Yuken, Japan
c. Pump: Atos, Italy
d. Oil Seals: NOK, Japan
e. Timer Relay: OMRON, Japan
f. Wiring Terminal Block:WEIDMULLER, Germany
g. Motor: Weiteli, China
2. Cost Effective
AIW SERIES Hydraulic Ironworker With Very good
price/performance ratio
Various AIW SERIES Hydraulic Ironworker capacity from *5T to
**0T to meet your requirement.
3. Stable Performance & Reliable Quality
AIW Series Hydraulic Ironworker use hydraulic transmission.
Light weight, low noise, reliable performance.
4. Simple Operation
The operation of hydraulic ironworker is controlled by foot
switch.
Technical Parameters:
|
Technical Parameter |
| No. |
Item |
Unit |
Value |
| 1 |
Hole
Punching |
Punching
Pressure |
KN |
**0 |
| Max. Punching
Thickness |
mm |
*0 |
| Max. Diameter of
Punching |
mm |
*0 |
| Depth of Throat |
mm |
**5 |
| Max. Length of
Cylinder Stroke |
mm |
*0 |
| Stroke Times |
times/min |
***2 |
| 2 |
Flat-bar
Shearing |
Angle of Shear |
degree |
8° |
| Max. Shearing
Thickness |
mm |
*0 |
| Flat Bar
(W×T) |
mm |
**0x*0 |
| **0x*0 |
| 3 |
Angle
Steel Shearing |
*0° Shearing of
Equal Angle Steel |
mm |
**0x**0x*2 |
| *5° Shearing of
Equal Angle Steel |
mm |
*0x*0x*0 |
| 4 |
Profile
Steel Shearing |
Round-bar |
mm |
*0 |
| Square-bar |
mm |
*5x*5 |
| T-bar |
mm |
**0x*0x*2 |
| I-beam |
mm |
**0x*6x6 |
| C-channel |
mm |
**0x*0x6.5 |
| 5 |
Notching |
Thickness |
mm |
*3 |
| Width |
mm |
*7 |
| Depth |
mm |
**0 |
| 6 |
Material
Tensile Strength |
N/mm2 |
**0 |
| 7 |
Motor
Power |
KW |
5.5 |
| 8 |
Overall
Dimensions(L×W×H ) |
mm |
***0x**0x***0 |
| 9 |
Gross
Weight |
Kg |
***0 |
Note:Design and specifications subject
to change without notice.
Accessories:
a. A pair of round hole punching die
b. A set of angle steel blade
c. A set of square and round bar blade
d. A set of shearing plate blade
e. A set of notching blade
The above punching and moulds will be installed in the machine.
For other dies and blades, customers need to order
Installation & Operation Training
APEC will provide you **7 day installation and operating
training in our factory.
