Three Return Dryer

Description

Three Return Dryer

Application:

The three cylinder dryer is mainly used for particle material which is humidity, such as yellow sand which used in dry mortar industry, all kinds of casting sand in casting industry, slag in building materials industry; also can drying small granularity clay, coal, coal ash, iron powder, ore, silica sand and so on.

 

Advantages:

1.Compact structure, small floor area, the length cut down *0% than single cylinder rotary dryer, be helpful to plant layout; 

2.High technical content, self heat preservation, thermal efficiency more than *0%(single cylinder dryer only *5%),fuel(coal) saving *8%,capacity increased *0%;

3.Reliable working condition, low consumption, high heating efficiency, good drying effect for materials, more automatic, less operate workers;

4.High temperature wear easy deformation parts adopt to durable wear resistant alloy steel, wearing-resisting 4times than common steel, long lifetime, easy maintenance;

5.Outlet temperature less than *0 degree, can continuous production and or packing;

6.Civil engineering investment lower about *0%,electric reduce about *0%;

7.Need not drive by gear, adopt to supporting roller for rotating;

8.The final humidity can adjust as customer's demands, the final humidity can less than 0.5%;

9.It is drying for less than *0mm pieces, granularity, powder materials.   

 

Working principle:

1.The material first goes into the inside drum, because there are the spiral shape boards fixed in the drum, when the dryer make rotary working, the spiral shape board will stir the material and make the material do movement.   three return dryers

2.When the material reaches the right side of the drum, it will go into the second drum for further drying.

3.The same working principle, the material then goes into outside drum, during the drying working process, thematerial will make three times drying, so the material can be dried  completely in this process.