Description
Shaver System ECONT***1 is intended for driving
blades and surgical cutters which are used during arthroscopic
surgeries.
Features:
• two outputs for Handpiece. Device recognizes the connected
Handpiece and automatically sets work parameters;
• two types of Handpiece blade locking system are available manual
and automatic;
• whole Handpice is autoclavable;
• short oscillation cycles: from 0,2 sec. in whole range. Faster
than even before oscillation times (constant for each speed **0
***0 RPM) up to 4 times at the highest speed;
• multilanguage menu (English, German, Polish, French, Russian,
Turkish);
• electronically controlled protection against overloading of the
Handpiece. Adjustment of torque, which prevents overloading of the
system, at the same time increases the efficiency of the drive
unit;
• continuous monitoring of engine rotation which provides its
constant value in the performance of work by blade;
• nonvolatile memory of recent settings (rotation speed, menu
language);
• stable work while oscillating. Thanks to fluent start of the
engine, the sharp tugs are disposed;
• additional circuit protection. It eliminates the risk of the
controller damage during usage / short circuit of the Handpiece
cable;
• two types of Footswitch are available with cable and
wireless.
Ordering data:
*1.***1.**0 ECONT***1.1 Arthroscopy Shaver System with Handpiece
manual lock and cabled footswitch
*1.***1.**0 ECONT***1.2 Arthroscopy Shaver System with Handpiece
automatic chuck and cabled footswitch
*1.***1.**0 ECONT***1.3 Arthroscopy Shaver System with Handpiece
manual lock and wireless footswitch
*1.***1.**0 ECONT***1.4 Arthroscopy Shaver System with Handpiece
automatic chuck and wireless footswitch Handpiece
