Description

~Detailed Product Description

Most advanced technolgoy

High quality for each part, 1 year\'s warranty

One stop service and reliable after sale service

Typical process flow

Raw water Pump + Multi-Medium Filter (Quartz Sand Filter + Activated Carbon Filter + Chemical dosing device + Security Filter) + High pressure Pump + Reverse Osmosis Host (HYDRANAUTICS ***0/***0) + Ultraviolet/Ozone Generator + Pump + Terminal Filter +Pure Water tank

Process and Outlet Water Standards

1. Pre-treatment + one stage RO system (conductivity ≤ *0μS/CM)

2. Pre-treatment + one stage RO system + ion exchange (resistivity 5~*0MΩ.CM)

3. Pre-treatment + one stage RO system + EDI (resistivity 5~*0MΩ.CM)

4. Pre-treatment + two stage RO system + EDI (resistivity *0~*5MΩ.CM)

We use the ion-exchange water softeners for the hard water, or using commercial water-softening chemicals. For most situations with water in hard and very hard classifications, an ion-exchange water softener is the desired alternative. Ion-exchange beads are extremely durable, but after softening a large quantity of hard water the beads become saturated with calcium and magnesium ions. When this occurs, the softener must be regenerated or recharged. This is done by flushing the ion exchange resin with a salt brine solution to replenish the resin with sodium ions. Demand initiated regeneration *- With a demand initiated regeneration unit, all operations are initiated and performed automatically in response to the demand for treated water. The need for regeneration is determined by measuring gallons of water used, or by measuring the change in the electrical conductivity of the resin bed, or by sensing a change in water hardness.

Contact Us

Please contact us for any inquiries. We offer free project designs in all aspects of water treatment to meet your demands according to the quality of raw water and the expecting water quality. We will get back to you within *2 hours!