Description
The navigational subscriber terminal
iON Base — is
an ultimately functional device you can install on the vehicle
to monitor its location, direction and speed, parameters of
its functioning and state of sensors and devices connected to the
terminal. iON Base can be installed on any type of vehicle
including construction equipment.
The navigational terminal receives information about its location
coordinates, current time, speed and movement direction from global
positioning system satellites — GPS and GLONASS. If access to
satellites is absent (above-ground parkings, ferroconcrete ceilings
and other disturbances) the location is determined using the
nearest GSM stations. Data gathered from satellites and readings
received from connected sensors are transferred to the dedicated
server through the GSM network. Using a comfortable web-interface,
the system user can monitor location and state of equipment
operation parameters using a PC, laptop, mobile phone or data
tablet from any place in the world.
Supported interfaces:
- Two *-Wire protocols allow installation of i-button and
temperature sensors.
- RS***5 standard allows to install different sensors,
indicators and additional devices.
- CAN protocol receives information directly from
trip-computer (fuel level and consummation, axle pressure, engine
rotation speed, engine load and other indexes)
In case of absence of the network, all information received by the
terminal is recorded to high volume built-in memory (**8 Mb). This
volume is sufficient for storing 2,5 million records. In case of
cellular communication cut-offs, zero balance of SIM-cards,
failures in the operation of data gathering servers navigational
terminal iON Base can store big volumes of information. Data may be
transferred to the server during connection reactivation, in case
of connection to the PC or through the USB-memory (flash memory).
In the course of information unloading to flash memory the
protection system with a built-in key is used. There is a unique
mechanism of data transfer realized in iON Base, all the
information is transferred to the server by two independent data
bursts. The navigational terminal is highly reliable and fault
resistible. There are two slots for SIM-cards that help reduce
traffic costs and prevent disconnections. The device is protected
against extraneous intervention— all plugs intended for connection
of wires, antennae, SIM-cards are concealed under the cover. When
the body is opened, the terminal gives a signal to the server. The
fact of opening is displayed in the dispatcher program in the form
of a message. iON Base has a possibility of remote update of
the terminal F/W.
iON Base is equipped with built-in lithium-polymeric rechargeable
battery (Li-Pol) with high capacity —***0 mA/h. It provides the
terminal with a possibility to function uninterruptedly for a long
period in case of absence of external power supply.
Principal Functions of iON Base:
• Determination of observed objects speed direction and
location in real time
• Data acquisition from various connected sensors
• All data transfer to the server (scheduled or by demand)
• Notification of dispatcher on "alarm events" (interruption of
power supply, bringing outside aerials out of operation,
unsanctioned decapsulation, exceeding of speed mode and etc.).
Possibility of SMS and e-mail notification.
• Data storing in the non-volatile memory
• Driving style analysis
All IRZ equipment has an open protocol and can be integrated into
different monitoring systems.
