Description
The binary input is a modular installation device for fast
installation in the distribution board on
*5 mm mounting rails to DIN
EN *0 **5. The electrical connection
is implemented using screw
terminals. The connection to the bus is implemented using the
supplied bus connection terminal. The
binary input is connected to the input directly instead of an extra
voltage supply. It is able to use the
Engineering Tool Software ETS (ETS2 v1.3 or later) with a VD2/VD3
file to allocate the physical
address and set the parameters, but a VD3 file imported is required
for EST3 software.
The devices feature one manual operation button and one LED per
channel. The inputs can be
operated manually with this button, and the LED indicates contact
connection state. In the case
of manual operation, there is no additional voltage
input.
The binary inputs serve as
interfaces for operation of EIB/KNX
systems via conventional
buttons/switches or for coupling of binary signals (signal
contacts, such as input *4V~**0V).
The binary input has many functions that can be used in a wide
variety of application areas. The
following list provides an overview:
 Switch and dimming function. (also 1 button
operation)
 Control of blinds and shutters. (also 1 button
operation)
 Sending of values e.g. temperature valuesã€time etc.
 Control and storing of light scenes.
 Operation of various loads by multiple push button
actions.
 Operation of several loads in a fixed switching
sequence.
 Standard counting and differential counting
 Channel disable/enable function
GVS K-BUS
KNX/EIB Binary
Inputs, 4fold
4
Each input can take over any of
the functions described above. Buttons
on the front of the
device can be used to simulate the input state. The status of the
inputs are displayed by LEDS.
