Description
The RS**5/ KNX converter is designed for intelligent building
control system. It has built-in
***0V ESD protection. The RS**5/ KNX converter can transfer two-way
signals, but only RS**5
devices can control the KNX/EIB devices with current version of our
open control protocol.Â
No standardized higher layer protocol for RS**5 bus, we define one
in the chapter 4 of this
manual for RS**5 devices to control KNX/EIB devices. The users can
configure or program the
RS**5 devices according to the protocol to achieve the control. The
RS**5/ KNX converter has two
working modes: the monitor mode and the filter mode. In the case of
the monitor mode, all active
telegrams can be forwarded. In the filter mode, only the telegrams
those with a group address in the
filter table in the RS**5/ KNX converter will be forwarded to the
other side. The filter table can be
set via the filter table setting command from RS**5 bus system.
