Description

Products: 
        LXC***0 series power plant automation controller integrates digital, intelligent, network technology, a single diesel generator sets for automation and control systems, automatic power-generating units / stop, data measure, police protection, and the "three remote" (to be with RS**5 module) function. The controller uses a large-screen LCD display, Chinese, English, Spanish and Russian optional interface operation, simple operation, reliable operation. Achieve a precise measurement of various parameters, setpoint adjustment, and timing, threshold setting and other functions, the controller of all parameters can be adjusted from the front panel of the controller, or use a PC via USB, RS**2 interface programming, adjustment and monitoring. Its compact structure, simple wiring, high reliability, and can be widely used in various types of generators automation systems. 
 
        LXC***0: LXC***0 based on the increase in electricity consumption monitoring and mains / generator automatic switching control function (AMF), especially suitable for stand-alone automated systems. 
 
 
Product performance and features: 
 
1 LCD LCD is **2 × *4, in four languages ​​(Simplified Chinese, English, Spanish, Russian) display, touch button operation; 
 
2 is suitable for three-phase four-wire, single-phase two-wire, three-phase three-wire, two-phase three-wire (**0V / **0V) power supply *0Hz / *0Hz system; 
 
3 collect and display mains / generator phase voltage, phase current, frequency, power parameters; 
 
4 mains overvoltage, undervoltage, phase function, power generation has overvoltage, undervoltage, over frequency, under frequency, overcurrent function; 
 
5. sophisticated collection of various parameters of the engine: coolant temperature, oil pressure, fuel quantity, the charger voltage, and depending on the setting for effective protection of the engine, to avoid accidental damage to the engine; 
 
6 control and protection functions: automatic diesel generator set start / stop, sub-gate (ATS switch) and perfect protection fault display function; 
 
7 with ETS, idle speed control, preheat control, lifting speed control function, and are relay outputs; 
 
8 parameter settings: allows the user to change the setting of its parameters, is not lost when the system is powered down, the controller of all parameters can be adjusted from the controller front panel, or by using a PC via a USB programming interface adjustments; 
 
9 various temperature, pressure sensors can be used directly, and custom parameters; 
 
*0. variety of starting conditions (speed sensor, hydraulic, power generation) optional; 
 
*1 Power supply a wide range (8 ~ *5) VDC, able to adapt to different starting battery voltage environments; 
 
*2 compact modular design, flame-retardant ABS housing, pluggable terminal blocks, embedded installation, configuration, easy installation 

Specifications: 
       Operating voltage: DC8.0V to *5.0V continuous power supply 
       Total power consumption:        Alternator Voltage Input: *5V AC **0 V AC (phN) 
       Three-phase four-wire *5V AC **0 V AC (phN) 
       Two-phase three-wire *5V AC **0 V AC (phN) 
       Single-phase two-wire *0V AC **0 V AC (phph) 
       Three-phase three-wire 
       Alternator Frequency: *0 Hz / *0Hz 
       Speed ​​sensor voltage: 1.0 to *4V (rms) 
       Speed ​​sensor frequency: maximum ****0Hz 
       Start relay output: 5A DC*8V DC power output 
       Programmable relay output 1: 5A DC*8V DC power output 
       Programmable relay output 2: 5A DC*8V DC power output 
      Programmable relay output 3: 5A DC*8V DC power output 
      Programmable relay output 4: 5A AC**0V passive output 
      Programmable relay output 5: 5A AC**0V passive output 
      Dimensions: **3mm x **5mm x*1mm 
      Hole size: **0mm x *0mm 
      Current transformer secondary current: Rated: 5A 
      Working conditions: Temperature: (*5 ~ *0) ° C Humidity: (*0 ~ *3)% RH
      Storage conditions: Temperature: (*0 ~ + *0) ° C 
       Protection class: IP*5: when waterproof rubber ring between the controller and the control panel. 
                       IP*2: When there is no waterproof rubber ring between the controller and the control panel. 
      Dielectric strength: Object: in the input / output / power between 
                      Reference Standard: IEC*******2 
                      Test methods: AC1.5Kv / 1min leakage current 3mA 
      Weight: TBD