Description
Products:
LXC***0 series power plant automation
controllers for single diesel generator sets automation and control
systems, signal control via remote power generators from the start
and stop; uses *2 microprocessors and embedded real-time systems
technology, automatic power-generating units / stop, precision
measuring a variety of parameters, alarm protection and "three
remote" feature. LCD graphics controller uses the big screen (**0 *
**8LCD) display, can display almost all important parameters in the
next page, save the page. Can be set to Chinese, English, Spanish,
Russian, all parameters can be adjusted from the control panel can
also use the PC via USB, RS**5 or GPRS remote adjustment and
monitoring. Its compact structure, simple wiring, high reliability,
and can be widely used in various types of generators automation
systems, but also for the fire pump, air compressor automation
control systems.
Product performance and features:
1, using **-bit ARM microcontrollers, hardware
integration, high reliability has been further improved.
2, large LCD LCD is **0x**8, with backlight,
Chinese, English and other languages ​​optional interface
operation, all parameters can be set on the controller, easy
commissioning test machine.
3, with advanced networking capabilities via
GPRS mobile network and Internet connectivity, the network in any
place can RMON.
4, in particular to provide for the leasing
industry management the perfect solution: leasing out via PC remote
management unit, can monitor all operating parameters (oil
pressure, water temperature, voltage, current, power, etc.), you
can change the configuration at any time to protect the unit
improperly applied, can record **0 detailed fault information,
including: key parameters downtime reasons, when the voltage,
current, power, oil pressure, water temperature, etc., and ready to
be uploaded to the monitoring machine. Another multi-level password
management to facilitate the lease term management.
5, with RS**5 communication interface, using
the MODBUS protocol can achieve "three remote" feature.
6, diesel or natural gas generator sets to
achieve automatic start / stop, sub-gate (ATS switch) and perfect
display fault protection and other functions;
7, LXC***0 for single generator set.
Special Note: All parameters can be adjusted from the front panel
of the controller.
Specifications:
Operating voltage: DC8.0V to *5.0V
continuous power supply
Total power consumption:
Alternator Voltage Input: *0V AC - **0 V AC (ph-N) 3
Phase 4wire
Three-phase four-wire: *0V AC - **0 V AC
(ph-ph) 3 Phase 3wire
Three-phase three-wire: *0V AC - **0 V
AC (ph-N)
Single-phase two-wire: *0V AC - **0 V AC
(ph-N)
Two-phase three-wire:
Alternator Frequency: *0 /
*0Hz
Speed ​​sensor voltage Vpp: 2.2 to
*0V (peak to peak)
Speed ​​sensor frequency: maximum
****0Hz
Start relay output: *6Amp controller
supply voltage output
Fuel Relay Output: *6Amp controller
supply voltage output
Programmable relay output 1: 7Amp **0VAC
passive output
Programmable relay output 2: 7Amp **0VAC
passive output
Programmable relay output 3: *6Amp
**0VAC passive output
Programmable relay output 4: *6Amp
**0VAC passive output
Programmable relay output 5: 7Amp
controller supply voltage output (LXC***0)
Programmable relay output 6: 7Amp
controller supply voltage output (LXC***0)
Dimensions: **0mm x **2 mm x *8
mm
Hole size: **6mm x **1mm
Current transformer secondary current:
5A Rated
Working conditions: Temperature: (**5 ~
+ *0) ℃ Humidity: (*0 ~ *0)%
Storage conditions: Temperature: (**0 ~
+ *0) ℃
Protection class: IP*5: when waterproof
rubber ring between the controller and the control panel.
IP*2: When there is no waterproof rubber ring
between the controller and the control panel.
Dielectric strength: Object: in the
input / output / power between
Reference Standard: IEC*******2
Test methods: AC1.5kV / 1min leakage current
3mA
Weight: 0.*8kg
