GD-265H Kinematic Viscometer

Brief Introduction

• The instrument is designed and made as per the national standard of People’s Republic of China GB/T**5 Test Method for Kinematic Viscosity of Petroleum Products and Calculation Methods for Dynamic Viscosity and the industry standard of People’s Republic of China SY/T***1 Technical Requirement for Petroleum Products Kinematic Viscosity Tester. 
• It is suitable to determine kinematic viscosity of petroleum products (Newton liquids) at a constant temperature as per GB/T**5  and ASTM D**5.

Main technical specifications and parameters
   1.Power supply: AC **0 V±*0%, *0 Hz
   2.Heating power of water bath: ***0 W
   3.Temperature range of water bath: room temperature~**0.0 °C
   4.Temperature controlling accuracy: ±0.*1 °C
   5.Cubage of water bath: *0 L
   6.iming range: 0.0 s~***9.9 s
   7.Timing accuracy: ≤ ±0.*5% in *0 minutes
   8.Sample quantity: four pieces of capillaries are installed at the same time
   9.Stirring motor:
      (1) Power: 6 W  (2) Rotation speed: ***0 RPM
   *0.Operation environment:
      (1) Ambient temperature: **0 °C~**5 °C   (2) Relative humidity: ≤*5%
   *1.Temperature sensor: industry platinum resistance, scale number is Pt**0
   *2.Total power consumption: ≤ ***0 W
   *3.Capillary viscometer: 7 pieces in total. Inner diameters are 0.6mm, 0.8mm, 1.0mm, 1.2mm, 1.5mm, 2.0mm, and 2.5mm respectively.