Description

A kind of superwide heavy loom developed for weaving papermaking felt on the basis of our national conditions is especially suitable for weaving of high-strength cropping papermaking felt, in particular to annular bottom fabric.
Technical Parameters: 
　　1、Applicable polyester monofilament: 0.*0～0.5mm or 0.2mmx6 strands
　　2、Weft density range: *0～**0 weft /*0cm.Warp density range: *0～**0 weft /*0cm.
　　3、Denting breadth∶*6m。
　　4、Economic speed∶*5 rev/min
　　5、Total motor power∶*0.*5KW。
　　6、Machine weight∶about *0T。
　　7、Overall dimensions∶Width****0×Depth***5×Height***0(mm)。
Machine structure：   
　　1、Rack: Main wall panels in cast iron box type structure to combine the whole machine, in a gap ***0mm
　　　　between two sets.
　　2、Main driving: Dual-motor double-side coaxial drive, *1kw for each motor; dual pneumatic clutch,
　　　　elliptical gear transmission for main transmission case.
　　3、Weft Insertion: Hydraulic shooting-in, 2*2 shuttle box change or weft section mechanism at two sides.
　　4、Shedding: Large blade type side pull dobby at two sides, **-pcs heald frame.
　　5、Beating-up: Multi-section assembled crankshaft four-bar linkage for beating-up at variable speed, a set
　　　　of cradle mechanism outside. 
　　6、Take-up: Three-roller active take-up under electronic control, with upper roll and lower roller driven by
　　　　servomotor.
　　7、Temple mechanism: Ring temple plus side weft control device, ring weaving temple plus side weft
　　　　control device. 
　　8、Warp let-off: Active let-off (by single warp beams, or beaming in reels) under electronic control.
　　9、Winding: External surface take-up driven by independent torque motor.
　　*0、Lubrication System: Combined automatic or manual feed of grease lubrication.
　　*1、Control system: Computer control system is available for free setting of parameters and automatic
　　　　display of faults.