Green Gabions Baskets Mesh

Description

Assembly 
The folded units shall be taken out from the bundle and placed on a hard flat surface.Green Gabion Baskets Mesh units shall be opened, unfolded and pressed out to their original shape. When the units are unfolded for assembly, they will have one or two shipping folds. They can be removed by placing the fold over a board and walking along the sides.

Fixing Procedure 
When using lacing wire, cut off a piece of wire approximately 1,5 times the length of the edge to be tied. The maximum length of the edge to be tied at one time shall not exceed 1 m. Longer edges shall be joined by several lengths of wire. Lacing wires shall be secured around the selvedge wire or heavier edge wire, where present, by looping and twisting the lacing wire around itself. Proceed tying with alternate double and single loops (Figure 3). Double loops shall be made at intervals not greater than **0 mm. All panels shall be pulled tightly together during the tying

Biotechnical engineering

Creek, stream, canal and riparian bank stabilization

Pond and lake shoreline stabilization

Sediment and storm water retention/detention pond slope stabilization

Salt marsh restoration, habitat and ecological restoration, and aesthetic revitalization

Biofiltration of landscape and watershed runoff flowing into stabilized area

LID, Green Infrastructure, and Green Building practices are preferred or required