At present, many countries in the world rely on copper scrap
regeneration to meet domestic demand at a large extent, and the
recovery and utilization of scrap copper has an important meaning,
which makes the copper metal resources expanded, whereas, the
copper scrap should be purified by refining furnaces.
The widely used refining furnaces are: stationary
reverberatory furnace, tilting refining furnace and NGL furnace.
The principle and process for the 3 furnaces almost the same, but
also have their own characteristics, Chengdu Shuhong will design
and manufacture according to the different needs of customers.
Stationary Reverberatory Furnace:
1.According to capacity:*5T***0T
2.Sample structure, lower cost, strong adaptability of raw
materials
3.Fuel type optional: NG/LPG/LDO/FO/COAL GAS
4.Simple operation, Widely used
Tilting Refining Furnace:
1.Super adaptability for raw materials, both solid and molten
material can be used
2.Easily charging, evenly material distributed, fast melting
speed
3.Reasonable furnace chamber with tilting mechanism, better
heat transfer effect and use ratio.
4.High degree of mechanization, compressed air for
oxidization, NG for de-oxidation
5.Reasonable tilt angle is good for Oxidation air spread in
the molten, high degree of oxidation
6.Effectively reduce black smoke pollution rates
7.Copper molten outlet is flexible equipped with casting
machine
8.High degree of automation, easily and safety for operation
and maintenance
NGL furnace:
The NGL furnace is developed on the basis of tilting furnace
and rotary anode furnace. At side of the furnace, there are 2 doors
for charging and drossing, another side has oxidation and
de-oxidation position and air brick, the furnace can be tilting
within a proper angle. At present, the capacity of NGL furnace can
be from **0T to **0T, it is suitable for processing high grade
Molten crude copper.
1.Convenient for charging and slag removing.
2.High thermal efficiency.
3.Safety
4.Environmentally friendly
5.High degree of automation
