stone veneer mold making rtv2 silicone

Description

Description of stone veneer mold making rtv2 silicone

rubber, Part A and part B. It features an exceptional fluidity and good operability.

 

stone veneer mold making rtv2 silicone could be mainly used for making concrete

 
 

*low shrinkage (less than 0.1% )

*easy for operation (mixing ratio at 1:1 /*0:1)

*Fast and non-shrink cure at room temperature which can be accelerated considerably by the application of heat
 

 

 

1:1 or *0:1

2**0±***0

*9

0

Operating time (  *5)

0.52hrs

2~hrs

*0

Tensile-strength(kgf /cm )

 

82

4

≤0.1

(Please note: the above data for this product in *5°C temperature, *5percent humidity conditions, for reference. The accurate data is measured by customers when using.)
 

1. Pls clear the model and tool totally before operation to prevent cure inhibition.

3. Mixing the two part in 1:1/*0:1 and stir part A and part B evenly in **3 minutes .

minutes . (If there is no vacuum machine, pls pour the mixture carefully and slowly

5. Enclose the product (the original model) with four plastic plates or wooden plates.

your product.

SHELF LIFE of stone veneer mold making rtv2 silicone:

If ratio is 1:1 :Packed in *0kg/pail + *0kg/pail and **0kg/pail + **0kg/pail.