Description

C***0M & C***0M-V Control Axes: 5 axes(X, Y, Z, 4th, 5th)
4 axes simultaneously for milling machine & machining centers
C**0M Control Axes: 3 axes (X, Y, Z)
3 axes simultaneously for milling machines
* * * * * * * * * * * * * * * * * * * * * * * * * *
Position Command Range:
Metric Input(G*1): ****9.***9mm~***9.***9mm
Minimum input: 0.***1mm
Imperial Input(G*0): ***9.***9inch~**9.***9inch
Minimum input: 0.***1inch
Electronic Gear:
Command Clock Multiplier Factor 1~****6, Division Factor 1~****6
Rapid Traverse Speed: Max. *0m/min
Rapid Override: F0, *5%, *0%, **0% four grade real-time switch
Cutting Feed rate:
Max. *5m/min(G*4) **0.*0mm/r(G*5)
Manual Feed Rate:
Feed Rate: 0~**0% sixteen grade real-time switch
MPG Feed Rate:
0.**1mm, 0.*1mm, 0.1mm, 1mm four grades
Single Step Feed Rate:
0.**1mm, 0.*1mm, 0.1mm, 1mm four grades
Interpolation Method:
Linear, Circular, Helical and Rigid Tapping
Auto Chamfering
* * * * * * * * * * * * * * * * * * * * * * * * * *
5 feeding axes, 4 axes simultaneously and 2 analog spindle for C***0M & C***0M-V
1ms interpolation cycle, 0.1um control precision
2 way 0V~*0V analog output, supports 2 spindles for C***0M and C**0M-V(C**0 has not)
Linear, exponential, and S-shaped acceleration and deceleration mode can be chosen
Multiple PLC, current PLC can be switched
PLC on-line display, monitoring and real-time signal tracking(C**0M has not)
Statement-style macro programming, macro call with parameters
Rigid tapping or tapping can be selected by parameters
Rotation, scaling, polar coordinate, fixed cycle, slotting composite circulation
Supports alarm and operation history, easy to management
Multiple password protection levels
*6 Input/*6 Output for C***0M, *6/*6 for C**0M
USB supports file operation and directly processing,
System setting and software upgrading, RS**2 is available too.
* * * * * * * * * * * * * * * * * * * * * * * * * *
Cutting Feeding Acceleration and Deceleraton:
Linear type, S type or Index type Spindle encoder:
Rapid Traverse Acceleration and Deceleraton:
Linear type, S type or Index type
Max. *5 NC block pre-read, ensure smooth and fast interpolation
For small segments, suitable for parts machining and mold making.
Starting, finishing speed & time of acceleration and deceleration set by parameter
Manual and MPG are control by afterward acceleration and deceleration
MPG supports immediate stop or full run mode
Rapid positioning supports straight line or fold line
* * * * * * * * * * * * * * * * * * * * * * * *
Tool length compensation
Tool nose radius compensation(C type)
* * * * * * * * * * * * * * * * * * * * * * * *
Two way 0V~*0V analog output and double spindle control for C***0M
Spindle encoder: Lines can be set between( **0 p/r~***0p/r)
Gear Ratio between encoder and spindle: (1~**5): (1~**5)
Spindle Override: *0%~**0% totally 8 grades real-time switch
Spindle constant surface speed control
Tapping circle, rigid tapping
* * * * * * * * * * * * * * * * * * * * * * * *
Thread Error Compensation:
Compensation Points, distance and reference point can be set
Backlash Compensation:
Fix frequency way, or Acceleration and Deceleration way
* * * * * * * * * * * * * * * * * * * * * * * *
PLC program in two levels, maximum ***0 steps, 1.5μs/step;
The refresh cycle of the 1st level program: 8ms
Support PLC warning and PLC alarm
Multiple PLC program(Max. *0), the current running PLC can be selected
Command amount: *5(Including basic command *0, functional command *5)
I/O unit input/output: *6/*6 for C***0M & C***0M-V, *6/*6 for C**0M
* * * * * * * * * * * * * * * * * * * * * * * *
7 inch wide screen LCD, resolution: **0X**0
The Chinese and English interface can be selected by parameters
Two dimension cutter path display
Real-time clock