Description
The V*0SS flow switch utilizes a rugged, hermetically sealed reed
switch which is encapsulated in a polypropylene switch housing that
fits into a standard heavy duty leak proof Stainless Steel body. It
could work for the pipe size *5mm to **0mm.
Character
* Wetted Material: Stainless Steel
* Environmental Temperature: **0C ~ *5C
* Medium Temperature: **0C ~ **0C
* Install Pipe Size: DN*5~DN**0
* Max Capacity Rating: AC**0V AC0.5A, DC**0V DC0.7A, Max *0W
* Wire: AWG*2 Red Color ***0mm
* Max Pressure: *0bar
* Pipe Connection: Male BSP1/2" NPT1/2" or Contact factory for
other options
* Enclosure Rating: IP*6
* Mounting Orientation: Switch can be installed in any position but
the actuation/deactuation flow rates are based on horizontal pipe
runs and are nominal values.
* Set Point Adjustment: Vane is trimmable.
Designed to provide an inexpensive, reliable unit to monitor the
presence or absence of flow in a system. The switch adjustment
allows the user to change the switch to Normally Open (NO) or
Normally Closed (NC) in the field merely by loosening two screws.
The switch housing is located outside the process media, making
switch change-over or maintenance easy without interruption of
process flow.
A full size, trimmable stainless steel vane is provided with a
removable laminated template. This template is calibrated for brass
or ductile iron reducing tees and forged steel straight tee/bushing
combinations. Allows for field installation in pipelines from 1/2"
to 6" diameter.
