Description
Overview
Â
Â
SINOV-TDM**0P
is a new generation analog card with interchangeable FXS_**0
 and FXO_**0 modules. It can eliminate the requirement for
separate channel banks or access gateways.
The
SINOV-TDM**0P contains 4 module banks. Each bank supports one
analog interface. The module banks may be filled with up to FXO_**0
or FXS_**0 modules enabling the creation of any combination of
ports. Scaling of an analog card solution is accomplished by simply
adding additional cards.
SINOV-TDM**0P_B
works with Asterisk®, Elastix®, FreeSWITCH™, PBX in a Flash,
trixbox®, Yate™ and IPPBX/IVR projects as well as other Open
Source and proprietary PBX, Switch, IVR, and VoIP gateway
applications.
Â
Main
Features:
1Â High
security: It adopt tertiary thunder preventing technology, can
prevent the thunder and lightning from striking
effectively.
2Â
No additional power connector or supplier is required for the
operation of FXS modules, reduced the line wave of the power, has
improved the voice quality.
3Â World
Wide Usable: Configurable line interface to meet global telephone
line interface requirements.
4Â The PCI plug is based on PCI Express 1X. User could choose
any of combinations of FXO_**0 or FXS_**0 modules according to
customer’s requirements.
5Â *2
bit bus master DMA data exchanges across PCI Express interface at
**0Mbytes/sec for minimum host processor
intervention.
6 The high
stability firmware is exported / imported with DMA data exchange,
so it accelerated and reduced CPU load greatly. Under the
environment of the same hardware, CPU rate of utilization is equal
to CPU rate of utilization of using 4 port analog
card.
7Â It
supports all the functions of Asterisk PBX systems
needed.
8Â Exchangeable with Digium modules: It is mixable with
X**0M/S**0M of Digium
9
Humanization is designed: The module socket that should be nipped
is all adopted and stuck to one slice of sockets, can prevent
stabing users finger effectively.
Â
New function:
1Â Â Â Easy to install , using way is same as DIGIUM
Asterisk card
2Â Â If use Trixbox/Elastix/Freeiris2 IPPBX software, it
can automatic recognition our cards, don’t need to install any
drivers.
3Â Â For 2U classis high
Â
Product
Spotlight
Â
SinoV-TDM**0P_B
is a new analog card. It can be used for connecting analog
telephones and analog POTS lines through a PC. It delivers the
superior voice quality on both FXO and FXS interfaces in
all 4 ports.
·Â
Adjustable Interrupt Routing Design
·Â
Interrupts Frequency Adjustment
·Â
Up to 4 Simultaneous PSTN Calls (Per PCI
Slot)
·Â
Compatible with All Commercially Available
Motherboards
·Â
*-Month “No Question Asked†Return Policy
·Â
Lifetime Warranty
Â
Target
Applications
Â
·Â
Channel Bank Replacement / Alternative
·Â
Small Office Home Office (SOHO) applications
·Â
Small and Medium Business (SMB) applications
·Â
Gateway Termination to analog
telephones/lines
Â
Â
Technical
Specifications
Â
·Â
Up to 4 ports through a combination of FXS_**0 and FXO_**0
modules
·Â
Full-length analog card
·Â
Up to 1 quad FXS or FXO modules
·Â
RJ*5 connector
·Â
**-bit *3MHz PCI and fully PCI 2.3 compliant, compatible with all
commercially available motherboards, and proper sharing of PCI
interrupts
·Â
*2 bit bus master DMA data exchanges across PCI interface at **2
Mbytes/sec
·Â
Autosense compatibility with 5 V and 3.3 V PCI busses
compatible
·Â
Power: 8.*1W Minimum, *8.*4W Maximum at 3.3 V or 5
V.
·Â
Operation temperature: 0°C to *0 °C
·Â
Storage temperature: **0°C to **5°C
Â
Operating
Systems
Â
·Â
Linux (all versions, releases and distributions from 1.0
up)
Â
Minimum
Hardware Requirement
Â
·Â
***-Mhz Pentium III
·Â
**8MB RAM
·Â
Available PCI Slot
Size and
Weight
Â
Size(L*W*H):Â **4**0**2MM
Â
Wight: **2g